Information Codes - Samsung DW80M2020 Series User Manual

troubleshooting

INFORMATION CODES

The Control Panel displays information codes to help you understand what is occurring with your
dishwasher.
If your dishwasher has a problem, the CODE SYMBOL lights blink as shown below.
For any codes not listed above, call 1-800-SAMSUNG (726-7864)
If an overflow occurs, turn off the main water supply before calling
for service.
If there is water in the base pan because of an overfill or small leak,
WARNING
the water should be removed before restarting the dishwasher.
No water
60
High-water level
60
Not reaching required
temperature
60
Water leakage
60
Thermistor open-circuit
failure
60
Thermistor short-circuit
failure
60
Abnormal operation of
touch key-press
60
Abnormal signal
60
English - 26
Possible
Th e water tap isn't opened.
Th e pressure switch is broken.
T he wash pump sn't work i ing
There is a problem with the Main PBA .
Th e high water switch was activated 5
The high water switch was on continuously for 120 seconds.
There is a problem with the Main PBA.
The heater was on continuously for 60 minutes, but the water
did not heat up to the required temperature.
Th e eater is broken. h
T he emperature detected by the t
There is a problem with the Main PBA.
T he leakage switch is broken.
The leakage switch was activated for 2 seconds.
There is a problem with the Main PBA.
The thermistor suffered an open-circuit failure.
There is a problem with the Main PBA.
The thermistor suffered a short circuit failure.
There is a problem with the Main PBA.
A touch key was operated abnormally or operated abnormally.
Example: A key was pressed for more than 30 seconds.
There is a problem with the Sub PBA.
A touch key was operated abnormally or operated abnormally.
Example: A key was pressed for more than 30 seconds
There is a problem with the Main PBA.
There is a problem with the Sub PBA.
.
times for 5 s econds.
ther mistor is wrong.