Care & Cleaning - Sage the Barista Pro SES878 Quick Manual

Care & Cleaning
INSTALLING THE WATER FILTER
1. Remove the water filter and water filter holder
from the packaging. Set the reminder for the
next month of replacement. We recommend
to replace the filter after 3 months.
2. Soak the filter in cold water for 5 minutes.
3. Wash the filter holder with cold water.
4. Insert the filter into the two parts of the filter
holder. Ensure they are connected.
5. Remove the water tank from the machine.
Align the base of the filter holder with the
adapter inside the water tank. Push down
to lock into place.
6. Remove the water tank from the machine.
Align the base of the filter holder with the
adapter inside the water tank. Push down
to lock into place.
7. Fill the water tank with cold potable water
and reattached the machine, ensuring
it is properly attached and sitting flush
to the back of the machine.
NOTE
Replacement water filters can be purchased
from the Sage website or by contacting
Sage Customer Service.
18
FLUSH CLEANING CYCLE
The LCD will display a FLUSH alert when
a cleaning cycle is required. The cleaning
cycle is separate from descaling.
GRIND LOCK
FASTER
POUR
HOPPER
DOUBLE
GRIND
SINGLE
SIZE
FLUSH
AMOUNT
DESCALE
RESET
DEFAULTS
SLOWER
PAUSED SEC
POUR
1. Insert the cleaning disc into the filter basket
in the portafilter.
2. Place a cleaning tablet on top of the
cleaning disc.
MENU
EXIT FILTER SIZE
3. Lock the portafilter into the group head.
4. Empty the drip tray and replace onto the
machine.
5. Fill the water tank to the MAX line then reattach
to the machine.
6. Press the MENU button to enter the main menu.
7. Use the GRIND AMOUNT dial to navigate
the menu to FLUSH, then press to select.
The 1 CUP button will illuminate.
8. Press the 1 CUP button to start the cleaning
cycle. The remaining time for the cleaning cycle
will be displayed on the LCD.
9. Once the cleaning cycle is complete, the
machine will beep and return to READY mode.
If any of the cleaning tablet remains in the
cleaning disc, repeat the cycle.
10. Empty and rinse the portafilter, cleaning disc
and drip tray.
SHOT
SHOT TEMP
PRE-INFUSE
HOTTER
HOT
WATER
IN
PROGRESS
FILL COOLER
TANK
STEAM
MANUAL
CUSTOM CUSTOM