Leister Electron Operating Instructions

Hot-air blower

Hide thumbs Also See for Electron:

Table of Contents

Download this manual

OPERATING INSTRUCTIONS

LEISTER Electron

Hot-Air Blower

Please read operating instructions carefully

before use and keep for further reference.

• Heating-up for forming, bending and sealing of thermoplastic semi-

finished materials.

• Drying of water-damp surfaces and joints.

• Shrinking of heat-shrink sleeves, films, tapes, solder sleeves and moulded

parts.

• Activating/dissolving of solvent free adhesives and fusion adhesives.

• Removing old shellac, oil, resin paints and underseals on vehicles.

• Defrosting of frozen water pipes.

• Welding thermoplastic materials as well as modified bitumen.

• Igniting of wood shavings, paper, coal or straw in furnaces.

LEISTER SALES & SERVICE CENTER CHINA , 20H Building No.1 515 Yishan Road ,Shanghai, PRC

LEISTER Process Technologies, Riedstrasse, CH-6060 Sarnen / Switzerland

Tel. +86 021 34141786 Fax. +86 021 64360767

http://www.plasticwelding.cn

Tel. + 41- 41 662 74 74 Fax + 41- 41 662 74 16

E-mail: leister@plasticwelding.cn

www.leister.com

sales@leister.com

Table of Contents

Do you have a question about the Electron and is the answer not in the manual?

Page 1: Operating Instructions
• Welding thermoplastic materials as well as modified bitumen. • Igniting of wood shavings, paper, coal or straw in furnaces. LEISTER SALES & SERVICE CENTER CHINA , 20H Building No.1 515 Yishan Road ,Shanghai, PRC LEISTER Process Technologies, Riedstrasse, CH-6060 Sarnen / Switzerland Tel.
Page 2 WARNING Danger to life when opening the tool, as live compo- nents and connections ar exposed. Unplug the tool before opening it. Incorrect use of hot air blowers can cause fire and explosion hazard, especially near combustible materials and explosive gases. Do not touch the element housing and nozzle when they are hot as they can cause burns.
Page 3 • Switch on (3) and allow to warm up for about 5 min. Operation • LEISTER Process Technologies as well as the Service Centres offer free training courses for all applications (see page 1). • Cool down the tool after use.
Page 4 Technical data and specifications are subject to change without prior notice. Your authorised Service Centre is: LEISTER SALES & SERVICE CENTER CHINA , 20H Building No.1 515 Yishan Road ,Shanghai, PRC Tel. +86 021 34141786 Fax. +86 021 64360767 LEISTER Process Technologies, Riedstrasse, CH-6060 Sarnen / Switzerland http://www.plasticwelding.cn...