care and cleaning
Always switch off and unplug before cleaning.
A little grease may appear at outlet
This is normal - just wipe it off.
The metal surfaces of the temperature sensors may show
signs of wear during normal use. This does not affect the
performance of the product.
Do not leave the high temperature flexible beater fitted to the
mixer when not in use.
appliance, outlet covers
Wipe with a damp cloth, then dry.
Never use abrasives or immerse in water.
high temperature creaming beater
Always remove the flexible wiper blade from the tool before
Wash the flexible wiper blade and tool in hot soapy water,
then dry thoroughly. Alternatively the parts can be washed in
Note: Please inspect the condition of the tool body before and
after use and also regularly inspect the condition of the wiper
blade and replace it if there are any signs of wear.
bowl, tools, splashguard, stir assist clip
Wash by hand, then dry thoroughly or wash in the dishwasher.
Never use a wire brush, steel wool or bleach to clean your
stainless steel bowl. Use vinegar or a suitable descaler to
service and customer care
If you experience any problems with the operation of
your appliance, before requesting assistance refer to
the "troubleshooting guide" section in the manual or visit
Please note that your product is covered by a warranty, which
complies with all legal provisions concerning any existing
warranty and consumer rights in the country where the
product was purchased.
If your Kenwood product malfunctions or you find any defects,
please send it or bring it to an authorised KENWOOD Service
Centre. To find up to date details of your nearest authorised
KENWOOD Service centre visit www.kenwoodworld.com or
the website specific to your Country.
Designed and engineered by Kenwood in the UK.
Made in China.
when you first use it.
If food sticks or burns on the inside of the bowl, remove as
much as possible using the spatula provided. Fill the bowl with
warm soapy water and allow to soak. Remove any stubborn
deposits using a nylon brush.
Any discolouration of the bowl will not affect its performance.
Ensure this area is free from food. If necessary use a pipe
cleaner or cotton bud to clean.
Wipe with a damp cloth then dry thoroughly. Never use
abrasives or sharp instruments to clean the sensors.
K-beater, whisk, creaming beater, stir tool
Stir assist clip
Splashguard and heat shield
Work surface protection mat
IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF
THE PRODUCT IN ACCORDANCE WITH THE EUROPEAN
DIRECTIVE ON WASTE ELECTRICAL AND ELECTRONIC
At the end of its working life, the product must not be disposed of
as urban waste.
It must be taken to a special local authority differentiated waste
collection centre or to a dealer providing this service.
Disposing of a household appliance separately avoids possible
negative consequences for the environment and health deriving
from inappropriate disposal and enables the constituent materials
to be recovered to obtain significant savings in energy and
resources. As a reminder of the need to dispose of household
appliances separately, the product is marked with a crossed-out