Installation Considerations; Rough In Dimensions - State Water Heaters Power Vent/Power Direct Vent Gas Models Instruction Manual

rouGh In dIMensIons

rough-In-dimensions
Model Units A
Inches 68.50 49.25
100
cm 174 125.09
Top/Side Inlet and Outlet: 3/4" NPT
Gas Inlet: 1/2" NPT
capacity, Gas and electrical characteristics
Approximate Capacity
Model
U.S. Gals. Liters
100 50 189
All models - Maximum Supply Pressure: 14 inches W.C. (3.48kPa)
Minimum Supply Pressure for Natural Gas: 3.50" (.87kPa)
Minimum Supply Pressure for Propane Gas: 8.00" (1.99kPa)
Minimum pressure must be maintained under both load and no load (dynamic and static) conditions.
recovery capacities - u.s. Gallons/hr. and liters/hr. at temperature rise Indicated
Input
Model
Rating Rating
(Btu/hr) (kW)
100 100,000 29.3
Recovery capacity based on 96% thermal efficiency

InstallatIon consIderatIons

B C D E
22.00 15.75 3.00
55.88 40.00 7.62
Manifold Pressure
Gas Type "WC kPA
Nat./LP 0" 0"
F 30
Temp.
Rise
C 17
GPH 387
LPH 1465 1102
FIGURE 1A.
F
8.00
20.32
Electrical Characteristics
Volts/Hz Amperes
120/60 <5
Recovery Capacities
40 50 60 70
22 28 33 39
291 233 194 166
882 734 628
7
80 90 100 110
44 50 56 61
145 129 116 106
549 488 439 401
120 130 140
67 72 78
97 90 83
367 341 314