Hitachi NEXT Series Instruction Manual page 20

3. OPERATING THE DSP [How to Use the Liquid Crystal Display (LCD)]
3.3.4 How to Move within a Menu Display and to Change a Setting
ー [FUNCTION MENU] and [MAINTenance DATA MENU] ー
The method and procedure for altering settings is displayed using the following as an example.
How to Move within a [FUNCTION MENU] Display
1
How to Select or Change a Setting within a Setting Display
2
18
①
②
③
④
① Press the MENU button displayed on monitor screen
1 – 2.
② Select the number of the item to be set with the
buttons.
△ ▽
③ Enter with the SET button. The display then switches
to the detail setting screen for that item.
The following explanation uses [2. Operation Mode
Setting Screen] as an example.
① When the display switches to the details screen, move
to the line to be altered with the
tons.
IMPORTANT
Items with a dash next to their number cannot be altered
on the LCD monitor. In this case, alter from the digital
monitor while referring to the instructions manual for the
compressor.
② Move to the item to be altered with the
③ Alter the setting value with the
④ After altering the setting value, press the SET button.
The cursor moves to the number.
⑤ Press the SET button again.
The cursor moves to the first number at the top of the
screen and the setting contents are entered.
When setting is complete, pressing the MONITOR but-
ton once returns the display to the MENU screen, and
pressing it again returns to MONITOR screen 1.
The same procedure is used to alter settings for other
menus.
IMPORTANT
When altering settings of the LCD screen, number update
by button operation is slow. Press the buttons slowly
when altering settings.
⑤
but-
△ ▽
button.
buttons.
△ ▽