y Handle with care during charging to prevent electric shock.
y Do not place near heating appliance.
y Do not disassemble or deform.
y Do not give shock on.
y Avoid too high or low temperature or humidity.
y You can connect the device to PC using the supplied USB cable, but
charging time can be longer.
y The operating time on battery may vary depending on the battery
status, operational status and environment conditions.
y Once fully charged, you can print up to 15 papers in a row.
y When the battery is discharged, printing is available after charging it for
more than 10 min.
(Charge in full to print in a row.)
1. Open the Paper insert door.
2. Unwrap the pack of the photo papers.
3. Slide Smart Sheet (Blue) and photo papers together into the Paper insert slot.
Smart Sheet will be ejected automatically before first printing.
y Do not insert more than 1 pack (10 Photo papers and 1 Smart Sheet).
Otherwise 2 papers may be ejected at once or paper jam may occur.
y Refill the device after using up the papers in.
y Do not push the papers deeper into Paper insert slot.
Inserting Photo Paper