Selmo Thesis Easy Manual

Selmo
Electronic Control for Towel Heaters
THESIS EASY is a special device that controls the
power output of the heating element between 20% and
100% by acting on the rotation of the knob. An
important element for the safety of people is the useful
presence of the NTC sensor which prevents the
ambient temperature from exceeding 37° C, in
compliance with European legislation. It can be
assembled with different heating elements that can be
easily found or replaced by the major European
manufacturers.
THESIS EASY is compliant with the following
standards:
-Eco-design Directive for Energy-using Products,
2005/32/EC (<0,5W).
-EN 60335-1:2012
-EN 60335-2-30:2011
-EN 60335-2-43:2008
-EN 61000-3-2:2004 - EN 61000-3-3:1995
-EN 55014-2:1998 -EN 55014-1:2008
-EN 50366:2003
Pg. 1
Electronic Electronic
Selmo Selmo
Via Pacinotti, 24 - 35030 Rubano Via Pacinotti, 24 - 35030 Rubano
"Thesis Easy"
Chrome
White
(PD) Italy- Tel 049.8976761, Fax 049.8976085 -
Comfort technology division
Functions
Four operational modes:
"Comfort", "Boost", "Stand-by", "Timer"
•
"Comfort" mode:
The thermostat manage power of heating
resistance in percentual of time between 20%
amd 100% (MAX).
•
"Boost" mode:
In "Boost" mode the heating element is activated
for a period of 2 hours. During this time interval,
the electrical resistance warms the room
independently of the configured "Comfort"
settings. The temperature is however
automatically adjusted in order not to exceed
3 °C. At the end of the 2 7
returns to previous operational mode.
"Stand-by" mode:
•
The electric resistance is not powered and all
lights are turned off.
• "Timer" mode:
This operating mode cyclically repeats every 12 or
24 hours the "Boost" mode.
hours period, the device
Rev. 01 - Oct. 2018
www.selmo.it www.selmo.it
EN