t-NEXT DF DX
OPTIONAL ACCESSORIES: P011 - EMPTY PLENUM
OPTIONAL ACCESSORIES: P012 - EMPTY PLENUM CL.A1
OPTIONAL ACCESSORIES: P031 - EMPTY INTAKE PLENUM
OPTIONAL ACCESSORIES: P032 - EMPTY INTAKE PLENUM CL.A1
OPTIONAL ACCESSORIES: P013 - PLENUM + 3 GRILLES
OPTIONAL ACCESSORIES: P014 - PLENUM + 3 GRILLES CL.A1
OPTIONAL ACCESSORIES: P015 - SILENCED PLENUM
OPTIONAL ACCESSORIES: P016 - SILENCED PLENUM + 1 GRILLE
OPTIONAL ACCESSORIES: P017 - PLENUM + FILTER EPM2.5 50%
OPTIONAL ACCESSORIES: P018 - PLENUM + FILTER EPM1 50%
OPTIONAL ACCESSORIES: P019 - PLENUM + FILTER EPM1 85%
The optional is supplied separately and the installation on the unit is at Customer care.
The plenums have same technical characteristics and base dimensions of the machine cabinet.
It is possible to install only a single plenum to ensure stability to the unit.
Frame in aluminium extrusion, painted with epoxy powders. Colour RAL 9005;
Panels in galvanized steel sheet with protective surfaces treatment in compliance with UNI
ISO 9227/ASTMB117 and ISO 7253, and painted with epoxy powders. Colour RAL 9005;
Panels insulated with
Panels fixed with screws.
Set of fixing elements to fasten the plenum to the unit.
In UNDER version units the piping is inside the machine.
The air delivery plenums sometime don't allow the extension of the pipes downwards.
In special cases, to keep the connections inside the machine, foresee a plenum 200mm higher
than the standard one.
and seals to ensure air tight.