Download  Print this page

Advertisement

English – 4​
Code
Cause
418
One or more buttons on the operating unit
are disabled.
419
Configuration error
422
Drive unit connection problem
423
eBike battery connection problem
424
Communication problem between com-
ponents
426
Internal time-out error
430
Internal battery of the on-board computer
is flat
431
Software version error
440
Internal drive unit fault
450
Internal software error
460
Error at USB port
490
Internal fault of the on-board computer
500
Internal drive unit fault
502
Bike light fault
503
Speed sensor fault
510
Internal sensor fault
511
Internal drive unit fault
530
Battery fault
531
Configuration error
540
Temperature error
550
An impermissible load has been detected. Remove the load. Restart the system. If the problem persists, con-
580
Software version error
591
Authentication error
592
Incompatible component
1 207 020 XBP | (14.05.2018)
Corrective measures
Check whether any buttons are stuck, e.g. as a result of dirt finding
its way in. Clean the buttons if need be.
Restart the system. If the problem persists, contact your Bosch
eBike dealer.
Have the connections checked
Have the connections checked
Have the connections checked
Restart the system. If the problem persists, contact your Bosch
eBike dealer. With this error, it is not possible to bring up the wheel
circumference in the basic settings menu or to adjust it.
Charge the on-board computer (in the holder or via the USB port)
Restart the system. If the problem persists, contact your Bosch
eBike dealer.
Restart the system. If the problem persists, contact your Bosch
eBike dealer.
Restart the system. If the problem persists, contact your Bosch
eBike dealer.
Remove the cable from the USB port of the on-board computer. If
the problem persists, contact your Bosch eBike dealer.
Have the on-board computer checked
Restart the system. If the problem persists, contact your Bosch
eBike dealer.
Check the light and the associated wiring. Restart the system. If
the problem persists, contact your Bosch eBike dealer.
Restart the system. If the problem persists, contact your Bosch
eBike dealer.
Restart the system. If the problem persists, contact your Bosch
eBike dealer.
Restart the system. If the problem persists, contact your Bosch
eBike dealer.
Switch off the eBike, remove the eBike battery and reinsert the
eBike battery. Restart the system. If the problem persists, contact
your Bosch eBike dealer.
Restart the system. If the problem persists, contact your Bosch
eBike dealer.
The eBike is outside of the permissible temperature range. Switch
off the eBike system and allow the drive unit to either cool down or
heat up to the permissible temperature range. Restart the system.
If the problem persists, contact your Bosch eBike dealer.
tact your Bosch eBike dealer.
Restart the system. If the problem persists, contact your Bosch
eBike dealer.
Switch off the eBike system. Remove then reinsert the battery. Re-
start the system. If the problem persists, contact your Bosch eBike
dealer.
Use a compatible display. If the problem persists, contact your
Bosch eBike dealer.
Bosch eBike Systems

Advertisement

Table of Contents

   Related Manuals for Bosch Purion BUI210

This manual is also suitable for:

Purion bui215

Comments to this Manuals

Symbols: 0
Latest comments: