Chemcassette ® Analyzer Mainte- Nance; Remove And Replace Analyzer Par- Ticulate Filters - Honeywell Vertex M Manual

24-point continuous monitor

Hide thumbs Also See for Vertex M:

Table of Contents

Vertex M

24-Point Continuous Monitor

5.3 Chemcassette

nance

This section describes maintenance and handling

procedures for the Chemcassette

noted otherwise, these procedures apply to both the

Universal Chemcassette

analyzers.

Section 5 - Maintenance

Analyzer Mainte-

analyzer. Unless

and the pyrolyzer model

5.3.1 Remove and Replace Analyzer Par-

ticulate Filters

The Vertex M Chemcassette

filters to protect the unit from particles and potentially

damaging gases. Table 5-1 provides maintenance

information about filters.

The Vertex M Analyzer houses filters in a filter magazine.

Use the following procedure when replacing filters.

1. Set analyzer to idle in the Runtime Options

window.

2. Touch Main Screen, Menu, Maintenance and

then Change Filter.

3. Touch the Analyzer module number in the

Analyzer selection keypad.

4. Touch Release Analyzer.

5. Slide analyzer out of cabinet until filter

compartment is visible.

5-3

analyzer uses various

Analyzer Selection

Keypad

Table of Contents