Download  Print this page

Honeywell 2MLL-PSRA User Manual Page 87

Pnet i/f module.
Hide thumbs

Advertisement

Step
Read area
(Master
module →
Slave
module)
Write area
(Slave
module →
Master
module)
Sending/
Receiving
data (Byte)
Note: *1 – Read/Write area is not able to set.
11
Click Online > Write Parameter. The Write parameter dialog box appears.
12
Select the applicable High-speed Link and click OK.
13
Click Online > Enable Link. The Link Enable(HS Link,P2P) dialog box
appears.
14
Select the applicable High-speed Link and click Write. If the High-speed Link
is enabled, then High-speed LED is ON.
R210
Pnet I/F Module 2MLL-PSRA, 2MLL-PSEA User's Guide
November 2011
Action
Read area to set the start address of device
used for sending.
2MLR
Refer to ML200R User's Guide for memory
address.
Read area to set the start address of device
used for Sending.
2MLI
Setting device : A, M, I, Q, R, W, F, K, L, N, U
Write area to set the start address of device
used for receiving.
2MLR
Refer to ML200R User's Guide for memory
address.
Write area to set the start address of device
used for receiving.
2MLI
Setting device : A, M, I, Q, R, W, F, K, L, N, U
Display input/output points of slave module (in bytes).
In case of I/O module of 8 bits or less, set 1 byte.
Honeywell
6. Profibus-DP Communication
6.6. How to set and download GSD
87

Advertisement

Table of Contents

   Also See for Honeywell 2MLL-PSRA

   Related Manuals for Honeywell 2MLL-PSRA

This manual is also suitable for:

2mll-psea

Comments to this Manuals

Symbols: 0
Latest comments: