6. Profibus-DP Communication
6.5. High-speed Link setting in SoftMaster-NM
Click OK in the Communication Module Settings dialog box.
The following window appears.
Click Online > SyCon Upload to upload the SyCon's configuration file.
Double-click the applicable index number of uploaded Configuration file and it
indicates the Read area and Write area of Sending/Receiving data.
The following table describes the block settings.
Station # *1
Pnet I/F Module 2MLL-PSRA, 2MLL-PSEA User's Guide
Display the Master station number.
Setting range for the slave : 0 ~ 126
If identical station No. is set, communication may not be
Sending: Data transmission from master module to slave
Receiving: Data transmission from slave module to