Download  Print this page

Honeywell 2MLL-PSRA User Manual Page 85

Pnet i/f module.
Hide thumbs

Advertisement

Step
The following table describes the communication settings.
Communication
module settings
Communication
period settings
Output data
setup in case of
emergency
R210
Pnet I/F Module 2MLL-PSRA, 2MLL-PSEA User's Guide
November 2011
6.5. High-speed Link setting in SoftMaster-NM
Action
Classification
Module type
Base number
Slot number
Period type
CPU error
CPU stop
Honeywell
6. Profibus-DP Communication
Description
Select Pnet.
Select base number on which the
module is installed.
Range of setting: 0 ~ 7
Select slot number on which the
module is installed.
Range of setting: 0 ~ 11
Set the data transmission period
Range of setting: 20ms, 50ms,
100ms, 200ms, 500ms, 1s, 5s, 10s
(default is 20ms)
Communication period is applied to
all of the Send/Receive blocks.
Data is latched or cleared when
CPU is on Error.
Data is latched or cleared when
CPU is Stop.
85

Advertisement

Table of Contents

   Also See for Honeywell 2MLL-PSRA

   Related Manuals for Honeywell 2MLL-PSRA

This manual is also suitable for:

2mll-psea

Comments to this Manuals

Symbols: 0
Latest comments: