Download  Print this page

Honeywell 2MLL-PSRA User Manual Page 82

Pnet i/f module.
Hide thumbs

Advertisement

6. Profibus-DP Communication
6.5. High-speed Link setting in SoftMaster-NM
Software
No.
23
24
Perform the following tasks to set the High-speed Link parameter.
Step
1
On the SoftMaster window, click Tools > Network Manager.
The SoftMaster-NM window appears.
2
Click File > New File.
The New NM Project dialog box appears.
3
Type the NM Project Name and select the PLC series.
82
Pnet I/F Module 2MLL-PSRA, 2MLL-PSEA User's Guide
Operation
used
High-speed Link
Parameters Write
High-speed Link
Enable
Honeywell
Action
(CPU area)
For Receive : specify Save area
(CPU area)
Click Online > Write Parameter
and verify the applicable High-
speed Link.
Click Online > Enable Link to
enable the applicable High-speed
Link.
Action
R210
November 2011

Advertisement

Table of Contents

   Also See for Honeywell 2MLL-PSRA

   Related Manuals for Honeywell 2MLL-PSRA

This manual is also suitable for:

2mll-psea

Comments to this Manuals

Symbols: 0
Latest comments: