Download  Print this page

Honeywell 2MLL-PSRA User Manual Page 63

Pnet i/f module.
Hide thumbs

Advertisement

Step
3
In the Available slaves list, select 2MLL-PSRA if you are using 2MLL-PSRA
and then click Add.
4
If there are several masters for the slave, select one master at a time from
the Master list and confirm the Station address and Description.
5
Click OK.
The slave module is inserted.
6
Double-click the inserted slave module. Or
Right-click the inserted slave module and from context menu choose Slave
configuration.
The Slave Configuration dialog box appears.
7
From the list of available modules, select the module having the necessary
point and click Append Module.
8
To set the parameter of the slave station, click Parameter Data.
The Parameter Data dialog box appears and the Parameter data consists of
6-byte data.
9
Click Common to check the meaning of the each parameter item.
The meaning of each parameter item appears.
R210
Pnet I/F Module 2MLL-PSRA, 2MLL-PSEA User's Guide
November 2011
5.3. How to set Pnet slave I/F module parameter
ATTENTION
You can insert up to 24 modules. Ensure that the setting is same
as that of High-speed link block in the SM-NM.
Honeywell
5. Communication Programming
Action
63

Advertisement

Table of Contents

   Also See for Honeywell 2MLL-PSRA

   Related Manuals for Honeywell 2MLL-PSRA

This manual is also suitable for:

2mll-psea

Comments to this Manuals

Symbols: 0
Latest comments: