Download  Print this page

Honeywell 2MLL-PSRA User Manual Page 61

Pnet i/f module.
Hide thumbs

Advertisement

Step
module as per requirement.
5
Right-click the selected base module and then click Properties.
The Communication Module Setting dialog box appears.
6
From the Type list, select Pnet slave.
7
From the Slot list, choose the slot as per requirement.
8
Click OK.
9
Double-click the newly configured Snet module.
The Standard Settings – Pnet slave dialog box appears.
10
Under Communication settings, perform the following:
a)
b)
c)
d)
e)
f)
g)
R210
Pnet I/F Module 2MLL-PSRA, 2MLL-PSEA User's Guide
November 2011
From the Type list, choose the communication type for both the channels
as per requirement.
From the Speed list, choose the communication speed for both the
channels as per requirement.
From the Data bit list, choose the bit size for both the channels as per
requirement.
From the Stop bit list, choose the value for both the channels as per
requirement.
Form the Parity bit list, choose the parity bit for both the channels as per
requirement.
From the Modem type list, choose the type of modem for both the
channels as per requirement.
In the Station # box, enter the station number for both the channels.
ATTENTION
The following are the basic values for the Communication Module
Setting.
Data bit = 8
Stop bit = 1
Parity bit = NONE
Modem type = Null modem
Honeywell
5. Communication Programming
5.3. How to set Pnet slave I/F module parameter
Action
61

Advertisement

Table of Contents

   Also See for Honeywell 2MLL-PSRA

   Related Manuals for Honeywell 2MLL-PSRA

This manual is also suitable for:

2mll-psea

Comments to this Manuals

Symbols: 0
Latest comments: