Download  Print this page

Figure 19 - High-speed Link Process - Honeywell 2MLL-PSRA User Manual

Pnet i/f module.
Hide thumbs

Advertisement

5. Communication Programming
5.1
How to set master module
This section describes how to set master module to use Pnet remote I/F module.
High-speed Link
High-speed Link is used when other station's data or information is periodically
exchanged at specific interval. By referring to the data exchange of its own station or
other station periodically, utilize the data effectively. It communicates the data by setting
the simple parameter.
The setting method is to designate its own area and the area of other station, data size,
and station number and then communicate. Data size ranges from 1 byte (8 bits) through
244 bytes and communication period ranges from 10ms through 10s according to
communication contents.
As it is possible to communicate with other stations by simple parameter setting, it is
easy to use High-speed Link. The High-speed Link process of internal data enables
periodic, simultaneous processing of huge data.
R210
Pnet I/F Module 2MLL-PSRA, 2MLL-PSEA User's Guide
November 2011
Figure 19 – High-speed Link process
Honeywell
49

Advertisement

Table of Contents

   Also See for Honeywell 2MLL-PSRA

   Related Manuals for Honeywell 2MLL-PSRA

This manual is also suitable for:

2mll-psea

Comments to this Manuals

Symbols: 0
Latest comments: