Download  Print this page

Honeywell 2MLL-PSRA User Manual Page 44

Pnet i/f module.
Hide thumbs

Advertisement

4. System Configuration
4.2. Part names and functions
3
STATUS
IF
4
HS
5
6
ERR
Error type
1.
Module detachment error: Module is detached from base while M.XCHG switch is
off.
Invalid module is attached: Invalid module such as communication module, High
Speed Counter module, and so on is attached at Base.
Out of I/O points: I/O module configuration is exceeding maximum data size
(244 byte) or no I/O data.
I/O parameter error: I/O parameter set by user is different with actual I/O
configuration.
When different parameter is downloaded during communication, ERR LED is
OFF.
When different parameter is downloaded during not communicating, ERR LED
is ON.
44
Pnet I/F Module 2MLL-PSRA, 2MLL-PSEA User's Guide
On
-
-
Off
Flicker
Off
On
Off
Off
-
Flicker
Honeywell
the slave is not being executed.
Communication cable is connected to the
master.
Communication cable is not connected to the
master because of error or detachment of the
cable.
Interface with CPU module is normal
Interface is not operating with CPU module
Setting of High-speed link parameter
downloaded from the XG-PD is normal and
High-speed link is enabled.
Setting of High-speed link parameter
downloaded from the XG-PD is abnormal or
High-speed link is disabled
No error.
O/S error or RAM error
Communication module is not normal
November 2011
R210

Advertisement

Table of Contents

   Also See for Honeywell 2MLL-PSRA

   Related Manuals for Honeywell 2MLL-PSRA

This manual is also suitable for:

2mll-psea

Comments to this Manuals

Symbols: 0
Latest comments: