Verifies diverse modules instantly.
Flexible communication relation is available as the speed is set automatically
according to the speed of master.
Hot-Swap function available.
Module can be changed during the RUN mode. Operation of all I/O modules,
except the module under change, is normal.
Before the module change, it communicates to BPMC about the module change
using switch manipulation.
After the module change, restores the mode switch.
You can check the invalid module installation and replacement through
operation of M_CHECK, M_CLO/SE at BPMC I/F program.
The characteristics of Pnet slave I/F module are as follows:
Supports open network by adopting a communication protocol of international
Communicates with remote master module.
Pnet I/F Module 2MLL-PSRA, 2MLL-PSEA User's Guide
Figure 1 – Hot swap function