User Guide ERRATA
4. Pairing the Aura Mobile BT™ with a Mobile Phone
• Make sure that your AMBT™ is powered on.
• Power on your Bluetooth® enabled mobile phone.
• To switch to Bluetooth® mode and connect to a
Bluetooth® mobile phone, press and hold the
Mode button
• Press and hold the Mode button
DO NOT release the Mode button
a two note chime. The "Bluetooth" indicator will
flash BOTH blue and amber. The AMBT™ is now
ready for pairing.
NOTE: If no connection is established with a Bluetooth®
mobile phone within 60 seconds, the AMBT™ will switch
to idle mode, signaled by a flashing amber "Bluetooth"
light. In this case, you must hold the
seconds until the "Bluetooth" light flashes blue and
a tone sounds. Next, hold the
until the "Bluetooth" light flashes both blue and amber.
• Follow your mobile phone's instruction guide to
connect to a Bluetooth® device. Typically, you will
click on a Bluetooth® icon and click "Discover device. "
• Your mobile phone should find the AMBT™ which is
displayed as "BTHS".
• Click on "BTHS" and click "OK" if your phone prompts
you to confirm.
• Your mobile phone will then prompt you to enter a
PIN or password. Enter: 0000
• If the pairing is successful, your mobile phone will
until a chime sounds. Release
on your AMBT™.
until you hear
button for 3
button once again
.