4 HUMAN INTERFACES
Custom labeling of an LED-only panel is facilitated by downloading a 'zip' file from
This file provides templates and instructions for creating appropriate labeling for the LED panel. The following procedures
are contained in the downloadable file. The CorelDRAW panel-templates provide relative LED locations and located exam-
ple-text (x) edit boxes. The following procedure demonstrates how to install/uninstall the custom panel labeling.
Remove the clear LEXAN FRONT COVER (P/N: 1501-0014).
Pop out the LED MODULE and/or BLANK MODULE with a screwdriver as shown below. Be careful not to damage the
Place the left side of the customized module back to the front panel frame, then snap back the right side.
Put the clear LEXAN FRONT COVER back into place.
The following items are required to customize the UR display module:
Black and white or color printer (color preferred)
CorelDRAW version 5.0 or later software
1 each of: 8.5 x 11 white paper, exacto knife, ruler, custom display module (P/N: 1516-0069),
custom module cover (P/N: 1502-0015)
Open the LED panel customization template in CorelDRAW. Add text in places of the Xs on the template(s) with the
Edit > Text menu command. Delete the X place holders as required.Setup the print copy by selecting the File > Print
menu command and pressing the "Properties" button.
On the Page Setup tab, choose Paper Size: "Letter" and Orientation: "Landscape" and press "OK".
Click the "Options" button and select the Layout tab.
For Position and Size enable the "Center image" and "Maintain aspect ratio" check boxes and press "OK", then "OK"
once more to print.
From the printout, cut-out the BACKGROUND TEMPLATE from the three windows (use the cropmarks as a guide).
GE Power Management
( LED MODULE )
( BLANK MODULE )
L90 Line Differential Relay
4.2 FACEPLATE INTERFACE
4.2.3 CUSTOM LABELING OF LEDs
and gently lift
up the cover.
4.2.4 CUSTOMIZING THE DISPLAY MODULE