Download Print this page
Spin Master Crash Force Regenerator User Instructions
Spin Master Crash Force Regenerator User Instructions

Spin Master Crash Force Regenerator User Instructions

Spin master ltd. motorized toy car user instruction

Advertisement

Quick Links

CRASH FORCE™
REGENERATOR SUV™
Crash Force™ Regenerator™ is designed to work with standard RC 6-Volt NiCad batteries and charger,
sold separately. If you do not have a 6-Volt battery and charger, Crash Force™ Regenerator™ can operate with
Five-AA batteries. • Controller is designed to work with a 9-Volt battery, sold separately.
6 VOLT
1 - To install the
6-Volt battery, rotate
the door locks to the
sides of the battery
compartment door
as shown.
2 - Remove the battery
compartment door.
3 - Place the battery
in the battery
AA BATTERIES
1 - To install the AA
batteries, rotate the
door locks to the sides
of the door as shown.
2 - Remove the battery
compartment door
and make sure the
internal battery
adjuster is folded in,
out of the way.
INSTALLING CONTROLLER
9 VOLT BATTERY
1 - Using a Phillips screwdriver, undo the
hold down screw and remove the battery
compartment door.
2 - Place the 9-Volt battery in the battery
compartment, making sure to follow the
correct + and – polarity markings.
3 - Replace the battery compartment door
and refasten the hold down screw.
BATTERY INSTALLATION
INSTALLING BATTERIES IN THE REGENERATOR™
compartment, making
sure to follow the
correct + and –
polarity markings.
Then fold the internal
battery adjuster out,
to hold the 6-Volt
battery in tight.
4 - Replace the battery
compartment door and
rotate the door locks
to their "Lock" positions.
3 - Place the batteries
in the battery tray
according to the + and
– polarity markings.
4 - Place the battery
tray into the battery
compartment.
5 - Replace the battery
compartment door and
rotate the door locks
to their "Lock" positions.
Compartment
Before taking Crash Force™ Regenerator™ RC
back to the retailer, call our friendly
RC technicians at: 1-800-622-8339
STORAGE: The Crash Force™ Regenerator™
RC should be stored indoors in the box and
foam tray after each use.
After
Impact!
Turn
Vehicle
Over
1
Lock
Battery
Compartment
Lock
Door
Turn
Vehicle
Over
1
Lock
Battery
Compartment
Lock
Door
Phillips Screw
1
Battery
Compartment
Door
9-V
2
Battery
3
Battery
IMPORTANT! PROBLEMS?
Battery
Compartment
2
Door
6-V
3
Battery
Battery
Compartment
2
Battery
Compartment
Door
Five-AA
Batteries
3
Battery
Tray
4
Battery
Compartment

Advertisement

loading
Need help?

Need help?

Do you have a question about the Crash Force Regenerator and is the answer not in the manual?

Questions and answers

Summary of Contents for Spin Master Crash Force Regenerator

  • Page 1 CRASH FORCE™ REGENERATOR SUV™ Crash Force™ Regenerator™ is designed to work with standard RC 6-Volt NiCad batteries and charger, sold separately. If you do not have a 6-Volt battery and charger, Crash Force™ Regenerator™ can operate with Five-AA batteries. • Controller is designed to work with a 9-Volt battery, sold separately. INSTALLING BATTERIES IN THE REGENERATOR™...
  • Page 2: Getting Started

    Spin Master Ltd. 450 Front Street West, Toronto, ON M5V 1B6 Canada Phone: 1-800-622-8339 Fax: 416-364-8005 Web: www.spinmaster.com Email: toys@spinmster.com ©2003 Spin Master Ltd. TM Crash Force and TM Regenerator are trademarks of Spin Master Ltd. All Rights Reserved. OPERATING VEHICLE...