Pairing With The Unit (Initial Registration) - Pioneer VSX-530-K Service Manual

1

3.3 PAIRING WITH THE UNIT (INITIAL REGISTRATION)

In order for the unit to playback music stored on a Bluetooth capable device, pairing must first be performed. Pairing should be
A
performed when first using the unit with the Bluetooth capable device, or when the pairing data on the device has been erased
for any reason.
Pairing is a step required to allow communication using Bluetooth wireless technology to be carried out.
• Pairing is only performed the first time that you use the unit and the Bluetooth capable device together.
• In order to allow communication using Bluetooth wireless technology to take place, pairing must be performed on both the
unit and the Bluetooth capable device.
• After pressing the BT and switching to BT Audio function, perform the pairing procedure on the Bluetooth capable device.
If pairing has been performed correctly, you will not need to perform the pairing procedures for the unit as shown below.
Please refer to the user's manual for your Bluetooth capable device for more details.
1 Press the u RECEIVER and turn the power to the unit on.
B 2 Press the BT.
3 Turn on the power to the Bluetooth capable device that you wish to pair with, and perform pairing procedure on it.
Note
• This unit will be displayed as "Pioneer AVR" on all Bluetooth capable devices that you have.
Pairing will start.
• Place the Bluetooth capable device close to the unit.
• Please refer to the user's manual for your Bluetooth capable device for details on when pairing can be performed and the
procedures required for pairing.
• When PIN code entry is requested, enter "0000." (This unit does not accept any PIN code setting other than "0000.")
4 Confirm on the Bluetooth capable device that pairing has been completed.
C
If pairing with the Bluetooth capable device has been completed correctly "CONNECT" will be displayed.
D
E
F
16
1
2
VSX-530-K
2
3
3
4
4