Page 2
Content Inside Package ...P.0 System Requirements & Installation Description...P.0 Installation Procedure ...P.1-P.9 How to using the Video-Out Card with PDA...P.10...
Page 3
Thank you for choosing SPECTEC SDIO VIDEO-OUT Card, the fantastic product you can get in the market place. It’s easy to carry and use. Just start to enjoy the most convenient wireless experience. 1. This SPECTEC SDIO VIEDO-OUT card can only be used with Windows Mobile 2002 or newer versions of this operation system.
Installation Procedure < First, connect PDA to your computer with a USB wire. < Main menu window will pop-up when you insert the Spectec SDIO Series Installation CD by autorun: <Click the "SDV-840/ SDV-841" item, then click "Slide Projector" item again.
Page 5
How to add a new printer for make JPEG file <Click the JPEG Transfer Method item (*Note : To install Acrobat software for browse specs) Install driver for PPC2002 / 2003 OS <Click "Pocket PC 2002 / 2003"...
Page 6
<Choose the desired Language, then click <Click Next <Enter user information then click Next...
Page 7
<Choose Setup type, then click Next <The driver package will be installed auto- matically. <Click Yes to proceed with installation. Click to finish installation.
Page 8
<Click Finish to complete the driver package installlation process. (*Note : Pls. reset the device to complete install Process)
Page 9
Install driver for WM5.0 OS <Click Window Mobile 5.0 item <Choose the desired Language, then click...
Page 10
<Click Next <Enter user infor- mation then click Next...
Page 11
<Choose Setup type, then click Next <The driver pack- age will be installed automatically. <Click to proceed with installation. Click to finish installation.
Page 12
<Click Finish to complete the driver package installlation process. 802.11b www.spectec.com.tw WLAN-11b <Click “Video-Out CAB Pacage“ to install Video-Out driver from PDA PATH:Start/Programs. 802.11b www.spectec.com.tw WLAN-11b <Checking the install driver "Spectec VotG" from PDA PATH : Start/ Settings/ System/ Remove Programs.
Page 13
How to using the Video-Out Card with PDA 1. Use ActiveSync software and Copy the JPEG file to PDA :\My Documents (Please note the file only can be detected when you save your file in \My Docu- ments) . 2. Insert the SPECTEC SDIO Video-Out card into the PDA.
Page 14
Specifications Interface: SDIO 1 bit, 4 bit & SPI modes of operation via SD card interface cable Resolution: Full-color (YUV 4:2:2) 640 x 480 Remote Control: 10-button Infrared with dual IR receivers Composite Video Output: NTSC/PAL 1Vp-p video signal S-Video Output: NTSC/PAL 1Vp-p component video signals VGA Monitor Output Port: <...
Page 15
Thank You for Purchasing Spectec’s Products...