AWXownermanual
7/22/04
7:19 PM
Page 1
Wall Mounting:
First, determine the best mounting hardware for the surface type
where your AWX Speakers will be installed. For a wood base
installation, use long screws. For less dense surfaces where the
speaker's weight needs to be supported, secure the mount to
a wall stud for support or use behind the wall fasteners.
SPECO TECHNOLOGIES WILL ASSUME NO LIABILITY FOR
SPEAKERS THAT WERE NOT INSTALLED PROPERLY.
For best secure installations, separate the speakers from their ball
mount connections and securely fasten the base by itself to the
mounting surface. Upon this conclusion, reattach the speaker
(with properly pre-attached speaker wires to terminals) to its ball
socket connection, position the speaker to its optimum desired angle
placement for sound enjoyment and tighten the three screws around
Owners' Manual for Models:
the ball connection socket until secure. WARNING: A LWAY S
SP-100AWX
LOOSEN SCREWS PRIOR TO REPOSITIONING SPEAKER TO
DESIRED ANGLE THEN TIGHTEN UPON FINAL S E L E C T E D
ANGLE. Forced positioning of the speaker angle when the ball
SP-100AWX-W
connection screws are tightened could lead to a loose ball
connection of the speakers. This type of mishandling is not covered
in the warranty.
Warranty:
Speco Technologies offers a limited 2 year warranty on our outdoor
speakers. Please reference the enclosed warranty card for
complete details of warranty.
All
Weather
Extreme
Speakers
SP-100AWX
SP-100AWX-W
Black
White
200 New Highway Amityville, New York 11701 • 631-957-8700 www.specotech.com