Speco DVRPC16T Backing Up Data

Remote Backup on the DVRPC16T
(Cloud Archiving)
Remote Backup is a tool that is on the CD that comes with the DVRPC16T. This tool will allow a user to pull data off of the DVR's database
from a remote location. This cloud archiving tool allows a user to configure what time this archiving happens and what data gets pulled
off of the database. This tool can be used locally to the DVR from a remote location.
Remote Backup is purely for backing up the *.dvr file from the DVR server. You can select between Auto Backup and Manual Backup.
Auto Backup continuously archives one hour of the recorded data at a time, starting from the specified date. As for Manual Backup,
it only archives the recorded data of selected date.
To back up the recorded data from the DVR server:
• Make sure you are connected to the internet.
• Click Start >> Programs >> DVR >> Web Tool >> Remote iBackup
• To add the DVR server, click Add
• In the Add New DVR windows, enter the Name, IP, user ID, and password.
• Select the Backup mode:
Auto Backup mode:
The backup will automatically execute when the setup is completed.
• In Begin Date drop down calendar, select the date from where to start.
• Click Add to set the storage path.
• Click Delete to remove the selected storage path.
• Click Schedule to select/unselect the time you want to backup.
The red block turns white when it is unselected.
• Enable/disable Disk Recycle check box, to automatically overwrite the
oldest file when there is not enough free space to backup the file.
Manual Backup mode:
The backup progress will start when user presses the backup button.
• Click File Select to choose the date,
time and camera you want to back up.
• Click Browse to set the storage path.
(continued on next page)
www.specotech.com • 1.800.645.5516
To back up the data, you must have at least 2G hard disk space.
Remote backup for model DVRPC16PT 1