Download  Print this page

Speco CVC230HZ Operation & Installation Manual

23x auto focus zoom color camera
Hide thumbs

Advertisement

OPERATION / INSTALLATION MANUAL
200 New Highway, Amityville, NY 11701
www.specotech.com
 S peco Technologies is constantly developing product improvements.
We reserve the right to modify product design and specifications
without notice and without incurring any obligation.
Rev. 4/28/10

Advertisement

loading

  Related Manuals for Speco CVC230HZ

No related manuals

  Summary of Contents for Speco CVC230HZ

  • Page 1 OPERATION / INSTALLATION MANUAL 200 New Highway, Amityville, NY 11701 www.specotech.com  S peco Technologies is constantly developing product improvements. We reserve the right to modify product design and specifications without notice and without incurring any obligation. Rev. 4/28/10...
  • Page 2 The lightning flash with an arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure the may be of sufficient to constitute a risk of electric shock to persons.
  • Page 5 Back 3) Key Buttons 1) Camera mounting screw hole 2) Camera mounting screw hole 4) Power LED 9) Power Input Terminal 8) Communication Control Connector 5) Video Output Jack 6) RS-485 7) External Control Connector...
  • Page 6: Key Buttons

    1. Top Mounting Bracket Screw Hole Used to fix tripod mounting bracket on top of the camera. 2. Tripod Mounting Hole Used to install the camera on an optional tripod. The tripod must be equipped with screws with specifications shown on the right. 3.
  • Page 7 7. External Control connector Relaters to the motion detection output signal. Zoom and focus functions can be controlled using external signals. 8. Communication Control Connector Used to connect the Remote Controller (Option). 9. Power Input Terminal Power supply terminal + Connection methods may vary depending on the video equipment. Please refer to the model specific instruction manual.
  • Page 8: Connecting To Power

    2) Connecting to Power Each model has a different power input specification. Please check the model type and standard power requirement before connecting to power. + Communication Control Connector Pin Description. Number Name Right Left Setup Number Name Auto Focus Down...
  • Page 9: Main Setup Menu

    CAM TITLE WHITE BALANCE ATW(OUTDOOR) BACKLIGHT HIGH MOTION DET FOCUS MODE ZOOM SPEED DISP ZOOM MAG LENS INIT EXPOSURE BRIGHTNESS SPECIAL USER PRESET DAY/NIGHT COMM ADJ RESET EXIT MAIN SETUP MENU AWCSET ZOOM TRK D-ZOOM ZOOM POS INIT IRIS SSNR PRIVACY IMAGE ADJ MANUAL...
  • Page 10 Use the six buttons on back of the camera Up button SET button LEFT button RIGHT button DOWN button 1. Press the SET button to access the main setup mode. - Main setup menu is displayed on the monitor screen 2.
  • Page 11 3. Change the status of the selected feature using the LEFT or RIGHT button. 4. When completed, move the arrow indicator to ‘EXIT’ and press the SET button. Use this feature to designate a name for the camera, which will display on the monitor screen.
  • Page 12 4. You can enter up to 20 characters. 1) Move the cursor to the character entry field using the LEFT or RIGHT button. 2) Use UP, DOWN, LEFT, and RIGHT buttons to select a desired character. 3) Press the SET button to confirm selection of the blinking character. The character is then saved, and the cursor in the entry field moves to the next position.
  • Page 13: Adjusting The White Balance

    Your camera provides three ‘WHITE BAL’ control modes for your choosing in Adjusting the white balance. 1. Press the SET button to access the main setup menu and move the indicator to ‘WHITE BAL’ using the UP or DOWN button. 2.
  • Page 14 When there is a strong backlight behind the object, clear images of the background as well as the object can still be obtained by using the BACKLIGHT function. 1. Please position the arrow to point to ‘BACKLIGHT’ on the SETUP menu by using the UP and DOWN buttons.
  • Page 15 + Please press the SETUP button. - OFF : MOTION DETECTION mode is cancelled. - ON : Any motion in the selected areas is observed. + Please press the SETUP button. - OFF : MOTION DETECTION mode is cancelled. - ON : Any motion in the selected areas is observed. + Please select the area you wish to observe from the 4 areas in AREA SEL mode.
  • Page 16 + ONE PUSH: Focus is automatically adjusted just once, after zoom position is changed. Select ‘ONE PUSH’ and press the SET button to conf irm. Increase or decrease optical zoom (ZOOM) or digital zoom (D-ZOOM) positions using the directional buttons while verifying the changes on screen.
  • Page 17 D-ZOOM : Configure magnification limit from x2~x10 using this feature. Po sition the indicator over ‘D-ZOOM’ using the UP or DOWN butto n. Set ‘D-ZOOM’ to ‘ON’ and press the SET button to confirm. Set ‘ZOOM LIMIT’ to the desired level using the LEFT or RIGHT button. DISP ZOOM MAG: Use this feature to display the current zoom magnification level on screen.
  • Page 18 LENS INIT: Use this feature to initialize the lens. Position the indicator over L ENS INIT. Using the UP or Down button. Press the SET button to confirm. END: To revert to the main setup menu. 1. Press the SET button to access the main setup menu and then position the indicator over ‘EXPOSURE’...
  • Page 19 IRIS: Set ‘IRIS’ to ‘AUTO’ or ‘MANUAL’. Position the indicator over ‘IRIS’ us ing the UP or DOWN button and then select the desired iris mode usi ng the LEFT or RIGHT button. ▶ -  A UTO : The iris is automatically activated upon illumination. - ...
  • Page 20 AGC (Auto Gain Control) : For brighter images. 1. Position the indicator over ‘AGC’ using the UP or DOWN button. 2. Set ‘AGC’ to the desired mode using the LEFT or RIGHT button. -  HIGH : Wide range gain value adjustment - ...
  • Page 21 SENS-UP : This feature ensures clear images at night or under low lighting conditions. 1. Position the indicator over ‘SENS-UP’ using the UP or DOWN button. 2. Set ‘SENS-UP’ to the desired mode using the LEFT or RIGHT button. -  AUTO : Select this mode for use in night time or under low lighting conditions.
  • Page 22: User Preset

    USER PRESET: Preset user-Designated configurations using this feature. Position the indi cator over ‘USER PRESET’ using the UP or DOWN button and then set to ‘ON’ using the LEFT or RIGHT button. Press the SET button to confirm. ▶ - PRESET NO : Up to eight different preset configurations are supported. ▶...
  • Page 23 - PRESET SAVE : Save configured preset. ▶ - PRESET CLEAR : Clear configured preset. ▶ - END : Revert to the SPECIAL SETUP menu. ▶ PRIVACY : Mask privacy area using this feature. The mask area expand / contract upon the zoom position. ▶...
  • Page 24 -  GROUP SEL : Choose up to eight groups. Each group can consist of four mask areas. -  MASK COLOR : Adjust desired mask color level. -  AREA SEL : Configure eight mask areas. -  AREA MODE : Mask area display. - ...
  • Page 25 SYNC : Two synchronization modes are presented, INTERNAL and EXTERNAL LINE-LOCK. EXTERNAL LINE-LOCK mode is not available at the moment. Needed to be upgraded. -  INT : Internal synchronization. -  LL : External line-lock synchronization. It is not available at the moment. COMM ADJ : Use this feature to select communication protocol (refer to p.46~p.51 for details).
  • Page 26: Image Adj

    IMAGE ADJ : Includes image quality or special function factors. -  FREEZE : Use this feature to freeze capture an image. -  H-REV : Use this feature to horizontally inverse the screen. -  V-REV : Use this feature to vertically inverse the screen. - ...
  • Page 27 MODEL Signal Format Scanning System Pick-Up Device Total Pixels Number Picture Element S/N Ratio Horizontal Resolution Lens Min. Focus Distance D. Zoom Angle field of view Minimum Illumination Digital Zoom Ration Sync Scanning System Sync Synchronization Frequency OSD (On Screen Display) Camera Title Camera ID Video Output...
  • Page 28 MODEL Gain Control White Balance Electronic shutter speed Motion Detection SSNR Focus Zoom Movement Speed Lens Initialize Preset Privacy Function FLIP FREEZE IRIS Control Operation Temperature / Humidity Supplied Voltage Power Consumption Option CVC652HZ 23X COLOR ZOOM CAMERA Low, Middle, High, OFF Selectable ATW (INDOOR (3,000~10500K),OUTDOOR (1,800~10,500K)) / AWC / MANUAL Auto/Manual...