When following the below recommendations, please keep in mind that placement is always in the ceiling. SpeakerCraft recommends the use of a qualified custom installation specialist when installing your CRS3 speakers. If you need assistance in locating an installer, please contact SpeakerCraft at 1-800-448-0976.
Page 3
Before painting the grilles, remove the material under grille. Place this material back in place once the grille has been painted. SpeakerCraft recommends only light spray painting using 5 parts thinning agent to 1 part paint. Do not paint the grilles while they are attached to the speaker.
In any case, the risk of loss or damage in transit is to be borne by the purchaser. If, upon examination at the Factory or SpeakerCraft Authorized Dealer, it is determined that the unit was defective in materials or workmanship at any time during this warranty period, SpeakerCraft or the SpeakerCraft Authorized Dealer will, at its option, repair or replace this product at no additional charge, except as set forth below.
Need help?
Do you have a question about the CRS3 and is the answer not in the manual?
Questions and answers