Southwestern Bell FM144 Owner's Manual

IMPORTANT SAFETY INSTRUCTIONS

BEFORE USING YOUR TELEPHONE
EQUIPMENT, BASIC SAFETY PRECAUTIONS
64 Memory Name and Number
SHOULD ALWAYS BE FOLLOWED TO
REDUCE THE RISK OF FIRE, ELECTRIC
Caller ID with Call Waiting*
SHOCK AND INJURY TO PERSONS,
INCLUDING THE FOLLOWING:
1. Read and understand all instructions.
2. Follow all warnings and instructions marked on
the product.
3. Unplug this product from the wall telephone
jack and power outlet before cleaning. Do not
use liquid cleaners or aerosol cleaners.
Use a damp cloth for cleaning.
4. Do not use this product near water, for example,
near a bathtub, washbowl, kitchen sink, laundry
tub, in a wet basement, or near a swimming pool.
5. Do not place this product on an unstable cart,
*IMPORTANT:
stand, or table. The product may fall, causing
FOR INCOMING CALL IDENTIFIER INFORMATION TO
BE PROVIDED ON YOUR CALLER IDENTIFIER, YOU serious damage to it.
MUST SUBSCRIBE TO CALLER ID SERVICE AND
6. Slots or openings in the cabinet and the back
CALLER ID CALL WAITING SERVICE WITH YOUR
and bottom are provided for ventilation, to
LOCAL TELEPHONE COMPANY . THE MONTHLY
protect from overheating. These openings
CHARGE FOR THIS SERVICE WILL APPEAR ON
YOUR MONTHLY BILL FROM YOUR LOCAL
should never be blocked or covered by placing
TELEPHONE COMPANY . CALLER ID MAY NOT BE
the product on a bed, or similar surface. This
AV AILABLE IN ALL AREAS AND SOME AREAS MAY
product should never be placed near or over a
OFFER NUMBER ONLY .
THE FM144 WILL NOT OPERATE WITHOUT THREE (3) AA radiator or heat register.
ALKALINE BATTERIES (NOT INCLUDED).
7. This product should be operated only from the
type of power source indicated on the marking
HELP LINE 1-800-366-0937
label. If you are not sure of the type of power
http://www.swbfreedomphone.com
supply to your home, consult your dealer or
FM144 Owner's Manual
local power company.
Se Incluyen Instrucciones en Español
China in Printed IB-4109 96SB2044 FM144
85307 AZ GLENDALE, BLVD., HARBOR GLEN N. 7475
PHONE FREEDOM BELL SOUTHWESTERN
®
http://www.swbfreedomphone.com
EST p.m. 12:30 - a.m. 8:30 Saturday
EST p.m. 9:00 - a.m. 8:30 Friday - Monday
1-800-366-0937
at Line Help Sales Retail
Phone Freedom Bell Southwestern
® Note: You must install the batteries in order for the
call: installation, or parts missing Caller ID function to work properly.
operation, regarding questions your to answers immediate For
PROBLEM. THE THROUGH YOU TALK EXPERTS THE AS - LISTEN 4. Replace the battery cover. All characters of the
NUMBER. TELEPHONE "HELP" TOLL-FREE THE FOR - LOOK
display will illuminate briefly.
STORE. THE TO BACK ME TAKE DONT - STOP
5. The display will show "SET LANGUAGE
6. Press REVIEW
ENGLISH, FRENCH or SPANISH.
7. Press the ERASE button to confirm the selection.
8. Next, the display will show "CONTRAST
9. Press REVIEW
REVIEW to make the contrast lighter.
10. Press the ERASE button to confirm the selection.
11. The display will show "CALL WAIT: MAIN".
12. If you are using more than one Caller ID unit in
your telephone system, keep the setting at
"CALL WAIT: MAIN" for one unit, and set all of
the other units to "CALL WAIT: EXT" by pressing
REVIEW or REVIEW
13. Press ERASE button to confirm the selection.
The display will show "12:00 AM 1/01".
NOTE: If you want to review the Caller ID quickly 3. Press ERASE button; ALL CALL INFORMATION
(about 5 records/second), press and HOLD the WILL BE ERASED. "--NO CALLS--" will be displayed.
REVIEW or REVIEW button. The unit will then 4. After 5 seconds, the Time of Day screen will be
displayed.
scroll through the Caller ID records continuously.
LOW BATTERY INDICATION
4. If no calls are in memory, pressing REVIEW
When the batteries are low, the battery icon will
or REVIEW will display NO CALLS.
flash. Be sure to review all your calls before
changing the batteries, since stored information
NOTE: The FM144 will retain call information for
may be lost when replacing batteries. Batteries
your most recent 64 calls. When the memory is full,
should be changed as soon as possible to main-
the FM144 will automatically erase the oldest call
tain reliable operation. Also, old or weak batter-
record and replace it with the newest call record.
ies can leak chemicals that can damage elec-
tronic circuits.

ERASING INDIVIDUAL CALL INFORMATION

1. Press REVIEW or REVIEW until the call
IMPORTANT: The unit should be idle for approx-
record you want to erase is displayed.
imately 2 minutes before installing new batter-
2. Press ERASE and "ERASE?" will be displayed.
ies. Every time batteries are replaced, you need
Press ERASE again to remove the call informa-
to program the language and area code.
tion displayed.
-In order to extend the life of your batteries, you
3. The display will then show the previous call.
can connect a DC power adapter. The power adapter
4. NO CALLS will be displayed if all call records
is not included, but is can be purchased through our
have been erased.
help line at 1-800-366-0937.
5. If no other key is pressed, after 20 seconds the
Time of Day screen and CALL XX (the total
number of calls stored in memory) will be displayed.

ERASING ALL CALL INFORMATION

1. With the Time of Day screen displayed, press
and hold ERASE.
2. "ERASE ALL?" Will be displayed.
13
In the absence of such purchase receipt, the warranty liabilities. ANY IMPLIED WARRANTIES,
period shall be one (1) year from the date of OBLIGATIONS, OR LIABILITIES, INCLUDING
manufacture. To obtain service under this warranty, BUT NOT LIMITED TO THE IMPLIED
return the defective product to the Service Center WARRANTIES OF MERCHANTABILITY AND
nearest you together with your sales slip and $9.50 FITNESS FOR A PARTICULAR PURPOSE,
for postage and handling. California residents need SHALL BE LIMITED IN DURATION TO THE
only provide proof of purchase. ONE-YEAR DURATION OF THIS WRITTEN
LIMITED WARRANTY .
This warranty shall be invalid if the product is
damaged as result of defacement, misuse, abuse, Some states do not allow limitations on how long
neglect, accident, destruction, or alteration of the an implied warranty lasts, so the above limitations
serial number, improper electrical voltages or may not apply to you.
currents, repair, alterations or maintenance by any
person or party other than our own service facility IN NO EVENT SHALL WE BE LIABLE FOR
or an authorized service center, or any use violative ANY SPECIAL, INCIDENTAL OR
of instructions furnished by us. This warranty is CONSEQUENTIAL DAMAGES FOR BREACH
also invalid if this product is removed from the OF THIS OR ANY OTHER WARRANTY ,
country in which it was purchased, if it is used in a EXPRESSED OR IMPLIED, WHATSOEVER.
country in which it is not registered for use, and /or
if it is used in a country for which it was not designed. Some states do not allow the exclusion or
Due to variations in telephone systems and limitation of special, incidental or consequential
communications laws, this product may be illegal damages, so the above limitation or exclusion may
for use in some countries. not apply to you. This warranty gives you specific
® legal rights, and you may also have other rights,
Southwestern Bell Freedom Phone Retail Sales
assumes no responsibility for damages or penalties which vary from state to state.
incurred resulting from the use of this product in a
Covered under one or more of the following US
manner or location other than that for which it is
intended. This one year limited warranty is in lieu of patents: 5,263,084.
all other expressed warranties, obligations, or
20
8. Do not allow anything to rest on the power cord.
Do not place this product where the cord will be
abused by persons stepping on it.
9. Do not overload wall outlets and extension
cords as this can result in the risk of fire or
electric shock.
10. Never push objects of any kind into this product
through cabinet slots as they may touch
dangerous voltage points or short out parts that
could result in the risk of fire or electric shock.
Never spill liquid of any kind on this product.
11. To reduce the risk of electric shock, do not
disassemble this product, but take it to a
qualified serviceman when some service or
repair work is required. Opening or removing
covers may expose you to dangerous voltage or
other risks. Incorrect reassembly can cause
electric shock when the appliance is
subsequently used.
12. Unplug this product from the wall outlet and
refer servicing to qualified service personnel
under the following conditions:
a. When the power supply cord or plug is
damaged or frayed.
b. If liquid has been spilled into the product.
c. If the product has been exposed to rain or
water.
d. If the product does not operate normally by
following operating instructions. Adjust only
those controls that are covered by the
operating instructions because improper
adjustment may result in damage and will
often require extensive work by qualified
1 2
NOTE:
1. The correct date and time are automatically set when
your FM144 receives its first call.
2. If you try to use the telephone before finishing
the Caller ID set up, or if you pause more than 40
seconds during any of the above steps, the display
will show "SET LANGUAGE " to remind
you to finish the sequence.
3. To reset the language, remove the batteries and then
install them again within 2 minutes.
4. When the unit is in the standby mode (i.e. not
displaying Caller ID information), the current time
will display in the middle of the screen. In the
situations when the Caller ID information is
displayed, the current time will be shown in a
smaller size on the top line.
".
or REVIEW to select
SET UP REQUIREMENTS
To install the FM144, your telephone must be
installed using modular connectors. If your
".
telephone is not wired using modular connectors,
to make the contrast darker or
contact your telephone supplier for the kit needed
for conversion.

CONNECTING DC POWER

NOTE: In order to extend the life of your batteries,
you can connect a DC power adapter. The power
adapter is not included, but it can be purchased
.
through our help line at 1-800-366-0937.
Use only with Class 2 Power Source DC 9V
150mA.
7 8

TROUBLE SHOOTING

Your telephone rings but the FM144 doesnt display
any messages.
1. Check that the FM144 line cord is properly
plugged into the wall jack.
2. Check with your local telephone company to
make sure call waiting Caller ID service is
being provided on your telephone line.
3. Make sure the batteries have been properly
installed and the unit is not in the program
mode.
ERROR appears on the display.
1. Bad data may have been transmitted from the
telephone company.
---ERROR--- will disappear once call records
are received.
NOTE: It is normal for these problems to hap-
pen occassionally. If these happens often, con-
tact your phone company.
2. If you pick up the phone before the second
ring, the caller information will not be com-
pletely received.
3. If an answering machine is connected to the
same phone line as your FM144, it must be
set to answer after four or more rings.
14 15
21
technician to restore the product to normal
operation.
e. If the product has been dropped or cabinet
has been damaged.
f. If the product exhibits a distinct change
in performance.
13. Avoid using the telephone (other than a cordless
type) during an electrical storm. There may be a
remote risk of electric shock from lightning.
14. Do not use the telephone to report a gas leak
in the vicinity of the leak.
15. Use only the power cord and batteries indicated
in this manual. Do not dispose of batteries in
a fire. They may explode. Check with local
codes for possible special disposal instructions.
Save These Instructions
SAFETY INSTRUCTIONS FOR BATTERIES
(CAUTION)
TO REDUCE THE RISK OF FIRE OR INJURY
TO PERSONS, READ AND FOLLOW THESE
INSTRUCTIONS:
1. Use only the size and type of batteries
mentioned in the Owner's Manual.
2. Do not dispose of the batteries in a fire. The
cells may explode.
3. Do not open or mutilate the batteries. Released
electrolyte is corrosive and may cause damage
to the eyes or skin. It may be toxic if swallowed.
3
1. Push the plug of the optional DC adapter (not
included) into the 9V DC Jack of the back of the unit.
2. Plug the other end of the DC adapter into a
standard AC outlet.
CAUTION: Always unplug the adapter from the
AC outlet before you unplug it from the FM144.

CONNECTION TO TELEPHONE LINE

1. Unplug the telephone line cord of your
telephone from the modular wall jack and plug
it into the PHONE jack on your FM144.
2. Plug the fixed line cord of the FM144 into the
modular wall jack.
3. Make sure the FM144 is set to "MAIN". (see
Installing Batteries section on page 7).
NOTE: The USOC jack RJ11C of the fixed line
cord used and the jack is Part 68 compliant.
NOTE: IF YOU ARE USING MORE THAN ONE
CALLER ID UNIT IN YOUR TELEPHONE SYS-
TEM, SET FM144 TO MAIN AND ALL OTHERS
TO EXT. (See Installing Batteries Section).
9
Unit is not receiving calls.
1. Check that telephone cord from the wall jack
,
is properly plugged into FM144 LINE jack.
2. Remove the batteries and reinstall.
Unit is not receiving Call Waiting Caller ID calls.
1. You must subscribe to this service from your
local phone company.
2. The phone must be off-hook to hear the call
waiting Caller ID alert signal.
3. Make sure all the connections are secure.
SERVICE
According to FCC regulations, this equipment,
which has been certified and registered by the FCC,
may only be repaired by authorized persons. If
repairs or adjustments are made by an unauthorized
person, the FCC certification may be voided.
Should you encounter any problems, please call the
®
Southwestern Bell Freedom Phone toll free
Customer Help Line for assistance: 1-800-366-0937,
Monday - Friday 8:30 am - 9:00 pm, and Saturday
8:30 am - 12:30 pm. You can also visit our website
at http://www.swbfreedomphone.com.
16
4. Exercise care in handling batteries in order not GENERAL INFORMATION
to short the battery with conducting materials
such as rings, bracelets, and keys. The battery UNPACKING
or conductor may overheat and cause burns.
5. Do not attempt to recharge the batteries This package contains:
identified for use with this product. The batteries FM144 Caller Identifier with Call Waiting
may leak corrosive electrolyte or explode. Owner's Manual
6. Do not attempt to rejuvenate the batteries Warranty Card (part of Owner's Manual)
identified for use with this product by heating If anything is missing or damaged, contact the place
them. Sudden release of the battery electrolyte of purchase. Keep the packaging to transport the
may occur causing burns or irritation to the eyes. unit and save the sales receipt for warranty reference.
7. When replacing batteries, all batteries should be
replaced at the same time. Mixing fresh and LOCATION OF CONTROLS
discharged batteries could increase internal cell
pressure and rupture the discharged batteries. TOP VIEW
8. When inserting batteries into this product, the
proper polarity or direction must be observed.
Reverse insertion of batteries can cause charging,
and that may result in leakage or explosion.
9. Remove the batteries from this product if the
product will not be used for a long period of
time; batteries could leak in the product.
10. Discard "dead" batteries as soon as possible
since "dead" batteries are more likely to leak
into a product.
11. Do not store this product, or the batteries
identified for use with this product, in high
temperature areas. Batteries that are stored in a
freezer or refrigerator for the purpose of
extending shelf life should be protected from
condensation. Batteries should be stabilized at
room temperature prior to use after cold storage.
4
CONNECTION TO ANSWERING MACHINE
ADJUSTING THE DISPLAY CONTRAST
Your FM144 can be used with a telephone answer- To adjust the LCD display contrast, press and hold
ing machine by following these instructions:
REVIEW and REVIEW
1. Unplug the telephone line cord of your telephone
for 2 seconds. Press REVIEW
from the modular wall jack and plug it into the
trast darker or REVIEW
phone jack of your telephone answering machine.
lighter. Press ERASE to confirm the contrast.
2. Plug one end of the telephone line cord into the
LINE jack on your telephone answering machine.

CALLER ID OPERATION

3. Plug the other end of this line cord into the
phone jack of the FM144.

RECEIVING CALLS

4. Plug the fixed line cord of the FM144 into the
After the first ring, the following information will appear
modular wall jack.
on the display: NEW CALL icon, caller's telephone
5. Make sure the FM144 is set to "MAIN". (see
number (and name if available), call's date and time,
Installing Batteries section on page 7).
REPEAT icon (if it is a repeat call), and an indication if
6. You must set the answering machine to
the caller information is not available or is blocked by
answer in four or more rings in order to
the sender. The NEW CALL icon and the NEW CALL
receive the Caller ID information.
LED will flash until you review all your new calls.
NOTE: If you answer your telephone before the second
ring, the unit will not display any call information.

RECEIVING CALL WAITING CALLER ID

When you are on a existing phone call, your FM144 will
display incoming call waiting Caller ID information.
1. You will hear a beep and your telephone will
be muted momentarily while the unit is displaying
NOTE: IF YOU ARE USING MORE THAN ONE
Caller ID information.
CALLER ID UNIT IN YOUR TELEPHONE SYS-
2. The CALL WAITING icon will be displayed.
TEM, SET FM144 TO MAIN AND ALL OTHERS
3. When you access the call waiting call, the
TO EXT. It is recommended that you use only one
Caller ID information will disappear and the
FM144 per telephone wall jack.
Time of Day screen will be displayed.
10
For In Warranty Replacement: FCC WANTS YOU TO KNOW
Package your complete unit (including all This equipment complies with Part 68 of the FCC
accessories) and ship the unit postage prepaid* rules. On the bottom of the base of this equipment
and insured (for your protection) to: is a label that contains, among other information,
®
SOUTHWESTERN BELL FREEDOM PHONE the FCC Registration Number and Ringer
Equivalence Number (REN) for this equipment.
DEPT: In Warranty
7475 N. Glen Harbor Blvd., Glendale, AZ 85307 You must, upon request, provide this information
to your telephone company.
Be sure to include your return address, proof of
The REN is useful to determine the quantity of
purchase, a daytime phone number, $9.50 for
postage and handling*, and a brief explanation devices you may connect to your telephone line and
of your difficulties. still have all of those devices ring when your
telephone number is called. In most, but not all
NOTE: areas, the sum of the REN's of all devices connected
*California residents need only provide proof of to one line should not exceed five (5.0).To be
purchase and should call 1-800-366-0937 for certain of the number of devices you may connect
to your line, as determined by the REN, you
shipping instructions.
should contact your local telephone company to
For Out of Warranty Service: determine the maximum REN for your calling area.
You may call our toll free Help Line at 1-800-366- If your telephone equipment causes harm to the
0937 for an estimated service charge before telephone network, the telephone company may
discontinue your service temporarily. If possible,
returning your unit. Please follow all instructions
for In-Warranty service to return your unit, and they will notify you in advance. But if advance
mark the package: DEPT.: Out of Warranty notice isn't practical, you will be notified as soon
as possible. You will be informed of your right to
file a complaint with the FCC.
17
INSTALLATION
CAUTION
1. Never install telephone wiring during a
lightning storm.
2. Never install telephone jacks in wet locations
unless the jack is specifically designed for
wet locations.
3. Never touch uninsulated telephone wires or
terminals unless the incoming telephone line
has been disconnected at the network interface.
4. Use caution when installing or modifying
telephone lines.
NOTE: Refer to "FCC Requirements" section
before connection to the telephone line.

Installing Batteries/Setting Language

1. Disconnect the unit from the telephone line
and DC power.
2. Use a pen or paper clip to loosen the battery
cover. Open the battery compartment by pressing
down on the battery cover and sliding it away from
the unit.
3. INSERT THREE (3) AA ALKALINE
BATTERIES into the battery compartment and
be careful not to press any of the function keys
while inserting the batteries. Be sure to
observe proper battery polarity (+ and -).
5 6
IMPORTANT:
1. If you are using multiple Caller ID units in
your telephone installation, one FM144 must
buttons at the same time
be set to MAIN and all others must be set to
to make the con-
EXT in order to receive call waiting CALLER
to make the contrast
ID information. Otherwise, the display will
show CALL WAITING and no Caller ID infor-
mation will be displayed.
2. You must subscribe to call waiting Caller ID
service from your local telephone company in
order to receive call information.

REVIEWING NEW CALLS

1. Press REVIEW or REVIEW and the display
will show the last new call information.
2. Repeatedly press REVIEW or REVIEW
review all new call information from the newest to
the oldest call until the END OF NEW CALL is
displayed and the NEW CALL LED turns off.

REVIEWING ALL CALLS

1. Press REVIEW and the unit will display the
oldest call record (CALL 01). Press REVIEW
and the unit will display the newest call record
(CALL XX, up to 64).
2. Repeatedly press REVIEW to review individ-
ual records from oldest call (CALL 01) to
newest call (CALL 64) or REVIEW to review
records from newest to oldest.
3. Continue reviewing all calls until --END-- is
displayed.
11 12
Your telephone company may make changes in its
facilities, equipment, operations, or procedures
that could affect the proper functioning of your
equipment. If they do, you will be notified in
advance to give you an opportunity to maintain
uninterrupted telephone service. If you experience
trouble with this telephone equipment, disconnect
from the network until the problem has been
corrected or until you are sure that the equipment
is not malfunctioning.
This equipment may not be used on coin service
provided by the telephone company. Connection
to party lines is subject to state tariffs.
LIMITED WARRANTY
The obligation of Southwestern Bell Freedom
Phone Retail Sales under this warranty shall be ®
limited to repair or replacement (at our option),
during the warranty period of any part which
proves defective in material or workmanship under
normal installation use and service, provided the
product is returned to Southwestern Bell Freedom
®
Phone Retail Sales or to one of our Authorized
Service Centers with TRANSPORTATION
CHARGES PREPAID. Products returned to us or
to an authorized Service Center must be
accompanied by a copy of the purchase receipt.
18 19
to