Use the information in this chapter to diagnose and correct monitor problems. This chapter describes
how to troubleshoot a monitor that is not operating correctly. Chapter 5, "Repairing the Monitor,"
describes how to perform the recommended repairs.
You can repair the monitor in either of two ways:
Spare parts, where you order replacement parts and you repair the monitor.
Bench repair, where you return the monitor to a Philips authorized service center for repair.
The tools required to repair the monitor are listed in "Tools Required for Service" on page 5-2. If you
open the case for a repair, you then must perform specific tests after reassembly. For detailed
information about these tests, see Chapter 3, "Performance Verification Testing."
The Philips Parts Center stocks board level assemblies and mechanical parts. Chapter 6, "Replacement
Parts and Assembly Drawings," lists these parts and assemblies. Service notes announce the
availability of additional spare parts.
For information about returning the monitor for repair, see "Clearing Patient Data" on page 4-37 and
the SureSigns VS2
When You Cannot Correct a Problem
The information in this chapter is intended to help you resolve most problems that may occur with your
monitor. If you still cannot isolate a problem after using the information in this chapter, call the Philips
Customer Care Center or your local representative.
and VSi Installation and Configuration Guide.
and VSi Service Guide