GE Network Series Installation And Startup page 14

Internet interface
Table of Contents

Advertisement

L
37-40
OCATIONS
These locations are used to provide the server for email in the form of mail.yourdomain.com.
This must be programmed for email. Confirm that this server accepts email from the domain
name of the NX-590E since many mail servers reject emails from domains other than their own
to prevent spamming.
Location 37
Location 38
Location 39
Location 40
L
41 - 44
OCATIONS
L
45- 52
OCATIONS
If you turned on static IP's instead of Dynamic in location 0, you will need to program locations
45, 52, and 54 with the appropriate IP addresses. Otherwise, the NX-590E will use the assigned
DHCP Server
Location 45
Location 46
Location 47
Location 48
Location 49
Location 50
Location 51
Location 52
It is necessary to power down the NX-590E module and power it back
up in order initialize the new IP address.
L
53
IP
OCATION
Location 53 contains the address for the download computer. The default is 0.0.0.0.
L
54
S
OCATION
UBNET
Location 54 contains the subnet mask (typically 255.255.255.0). However, we suggest you call
your Network administrator. This location must be configured so that all IP addresses up to and
including the local gateway are allowed. When using cable modem/DSL, this will generally be
the same as the computer. To obtain your IP address, gateway, and subnet mask, use one of
the following steps:
For Windows 9X and Windows ME -- At the DOS prompt, type "ipconfig"
For Windows 2000 & XP -- At the COMMAND prompt, type "ipconfig"
L
55-57
OCATIONS
These locations contain the IP ports used by the TCP/IP receiver. You should never change
these except as directed by your central station provider.
Location 55
Location 56
Location 57
L
58-59
OCATIONS
14
N
AME FOR YOUR
Name of Mail Server (chars 1-16)
Name of Mail Server (chars 17-32)
Name of Mail Server (chars 33-48)
Name of Mail Server (chars 49-64)
R
ESERVED
IP
ADDRESSES
IP Address For This Module
IP Address For Primary Receiver
IP Address For Secondary Receiver
IP Address For On-Site Event Recorder
Reserved
Reserved
IP Address Mail Server
IP Address of Gateway
D
ADDRESS FOR
OWNLOAD
M
(1
ASK
SEGMENT DECIMAL DATA
P
A
ORT
DDRESSES
Receiver Alarm Port
Receiver Download Port
Email Port
R
ESERVED
E
S
(1
MAIL
ERVER
(1
SEGMENT DECIMAL DATA
C
OMPUTER
)
(4
SEGMENTS DECIMAL DATA
/ 16
SEGMENT
CHARACTER DATA
)
(1
SEGMENT DECIMAL DATA
)
NX-590E Internet Interface
)
)

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Nx-590e

Table of Contents