Download Print this page

English - AEG GourmetPRO Series Instruction Book

Hide thumbs

Advertisement

ENGLISH

Thank you for choosing an AEG product. In order to ensure the best results, always use original AEG accessories and
spare parts. They have been designed especially for your product. This product is designed with the environment in
mind. All plastic parts are marked for recycling purposes.
COMPONENTS
A. Jug
B. Spout
C. Lid with filler hole
D. Measuring cup
Picture page 2-3
GETTING STARTED
1
Before using the blender for the first time, wash all parts except for the motor housing. The jug can also be washed
in dishwasher.
Caution! The blades are very sharp!
Note! The blade assembly is not removable.
2
Place the blender jug with the handle towards the front, onto the motor housing (The jug can only be placed in
one position).
Put the ingredients in the jug.
(Do not exceed the maximum level as indicated on the jug.)
3
Close the lid (A) and insert the measuring cup in the filler hole and (B) lock into position. (You can use the measur-
ing cup to add ingredients while the blender is running. Close the filler hole immediately after, to avoid splashing.)
Caution! Never run the blender empty. When processing hot liquids, see step 4.
4
Processing hot liquids: We recommend to allow hot liquids to cool down (max 90 °C) before filling the jug. Fill the
jug only half full and start processing on low speed. The blender jug can become very warm – take care to protect
your hands and to ventilate steam out through the filler hole. Always replace the lid before use.
5
Start the blender: Plug into mains. Press the Power button (A), the LED light will illuminate and the display becomes
visible. Press the 1 (Low), 2 (Medium) or 3 (High) button (B), to select your desired processing speed.
6
It is also possible to choose one of the ready programs for ice crushing, drinks, soups or smoothie. Press the but-
ton to start and the light will indicate the program selected. The blender will operate max for 120 seconds, or until the
program is finished. To stop manually, press any button.
7
Caution! Keep hands and utensils out of the blending jug while blending. After processing heavy loads, let the
appliance rest for 5 minutes before next use.
8
Boost Function: Press the "Boost" button (A) and hold it down for pulsing, when you need a short burst of power.
Smoothie Function: Press the "Smoothie" button once (B) to get ice crushed and your smoothie blended to the
desired consistency with the specific program. The blender will stop automatically when the program is ready.
9
Ice Crush Function: Press the "Ice Crush" button (A) to start the Ice Crush program. (For best results, work in small
batches.)
Drink Function: Press the "Drink" button (B) to mix a drink.
Soup Function: Press the "Soup" button (C) to mix soup.
Caution! Never run the blender empty. When processing hot liquids, see step 4.
CLEANING AND CARE
10
Quick cleaning: Pour warm water into the jug, add a few drops of detergent. Mix water and detergent by pressing the
"Boost" button. Finally, rinse the jug under running water.
Note: To avoid crazing of the jar, always rinse the jar with clean water directly after using in order to prevent the
plastic material being impacted by acids or essential oils. Always rinse the jar clean even before placing it into the
dishwashwer.
11
Thorough cleaning of the motor housing and interface: Turn the blender off and unplug the power cord. Wipe the
motor housing with a damp cloth.
Warning! Never immerse the housing, plug, or cord in water or any other fluid.
www.aeg.com
SB9300_GourmetPro_Blender_AEG_NEW.indd 6
E. Blades and blade assembly
F. Motor housing with cord storage
G. Control panel with display
H. Non-slip feet
6
2017-06-05 14:09:42

Advertisement

loading

  Also See for AEG GourmetPRO Series

This manual is also suitable for:

Gourmetpro sb93 series