Soundolier Maestro Maestro Wireless Speaker Lamp User Manual

warranty

Soundolier wireless products purchased in the United
States from authorized dealers are guaranteed
against defects in material and workmanship for a
period of 90 days, the warranty period begins the
day the product is purchased by the end user. This
warranty is limited to the original retail purchaser of
the product. Product found to be defective during
that period will be repaired or replaced by
Soundolier at no charge. This warranty is void if it is
determined that unauthorized parties have
attempted repairs or alterations of any nature.
Warranty does not extend to cosmetics or finish.
Before presuming a defect is present in the product,
be certain that all related equipment and wiring is
functioning properly. Soundolier disclaims any liability
for other incurred damages resulting from product
defects. Any expenses incurred in the removal and
reinstallation of product is not covered by this
warranty. Soundolier's total liability will not exceed
the purchase price of the product. Shipping charges
incurred to send the product in for warranty service
shall be paid by the customer. Return shipping from
service center to the customer will be paid by
Soundolier. Proof of purchase is required when
requesting service, so please retain your sales
receipt. Also, a Return Authorization number (RA) is
required before shipping product back to Soundolier,
call 800-556-2888. Retain original packaging for all
warranty returns.

specifications

dimensions

• height: 5¾" (14.6cm)
• width: 2¼" (5.7cm)
• depth: 5¾" (14.6cm)
• weight: 5oz (142g)
• power requirement:
5V, 500mA, 12VAC, 50Hz-60Hz
power supply included

wireless

• 2.4GHz stereo transmitter
• speaker level or 3.5mm stereo input
• 4 selectable signal channels
• 20Hz-20kHz full range audio
• 200ft (60m) maximum
line of sight reception
• transmits to an unlimited number
of Soundolier devices
fcc compliant
Wireless Transmitter: FCC Title 47, Part 74
© 2007 Soundolier. Soundolier, duo, epico & maestro are trademarks of Mitek Corp. All rights reserved.
Due to continual product development, all specifications are subject to change without notice.
MKC002497 RevB 1/07 NDM496