1. Remove the Bobbin Case by pulling on the
3. Pull several inches of thread from Bobbin
through the Bobbin Case.
When the thread is
pulled the bobbin
will turn clockwise.
Installing the Bobbin Case
2. Place the full Bobbin into the Bobbin Case.
Note: The bobbin thread needs to slide into the
slit on the Bobbin Case.
*Note the direction the
thread is coming off the
bobbin in relation to the
4. Place the Bobbin Case into the quilting
machine with the lever arm at the 3 o'clock
position, and press it into place until it clicks in.
Do Not Use
the lever when