Winding Bobbins - Brother Dream Quilter 15 Instruction Manual

1. Place the thread on the thread stand.
2. Pass the thread through the hooks in the thread mast.
3. Pull the thread through the bobbin thread guide at the back of the
quilting machine.
4. Loop the thread around the spring hook and around the thread
tensioner.
5. Wrap the thread around the bobbin as shown.
6. Start the bobbin winder by pushing the bobbin winder cam into the
bobbin.
Note: When the bobbin is full it will automatically stop.
Loosen set screw
and twist cam,
to adjust bobbin
fill. (Clockwise for
to decrease fill,
counterclockwise
to increase fill)
6
5
Bobbin
Winder Cam
Thread
Cutter
When the bobbin is full you can cut
the thread with the thread cutter
found next to the bobbin stand.

Winding Bobbins

The bobbin winds in a
clockwise direction
4
Make sure the
thread is between
the tensioner discs
12
Thread
Mast
3
The bobbin winder runs on
a separate motor from the
quilting machine. This al-
lows you to wind bobbins
with the quilting machine
running or stopped, as
long as the power is on.
2
1