Step 3: Plugging In The Cables - Brother Dream Quilter 15 Instruction Manual

Parts Needed:
1. Power Cable (1)
2. Foot Pedal (1)
3-1: Plug in the Foot Pedal Cable into the sewing
machine.
3-2: Once all the cables are connected, you can
attach the power cord to the sewing machine,
then connect the power cord to an outlet.
Off
On
USB Connector Port
(Programming only)
Foot Pedal
(For sit down system)

Step 3: Plugging in the Cables

Power
Adapter
3-3: When you are ready to begin sewing,
turn on the machine using the power switch
located on the back of the machine.
Note: Below is a reference of how the
machine should be configured.
Power
Cord
Foot
Pedal
Cable
10