Sony NSP-1 Operating Instructions Manual page 7

h DC IN 13.5V connector/Metal cable retainer
Connect the DC cable of the supplied AC adapter to this
connector.
After connecting the DC cable, it is recommended that you
attach the supplied metal cable retainer to prevent the DC
cable from being accidentally disconnected.
After connecting the DC
cable, attach the supplied
metal cable retainer.
i Cable lock
Attach a security cable to prevent the unit from being
stolen.
j GPI (general purpose interface) connector (D-sub
25-pin, female)
This is a parallel interface connector.
For detailed information on this connector, contact your
nearest Sony dealer.
k
(SERIAL) (general purpose interface)
connector (D-sub 9-pin, male)
Connect this to the D-sub 9-pin connector of a plasma
display or video monitor to allow you control those
devices.
l
Analog RGB OUT) (general purpose interface)
(
connector (HD D-sub 15-pin, male)
Connect this to the VGA connector of a plasma display or
video monitor.
m USB connectors
Currently, these connectors are not used. They are reserved
for future use.
Names and Functions of Parts
7