Advertisement
2.0 Tools Required
List the type and size of the tools that would typically be used to disassemble the product to a point where
components and materials requiring selective treatment can be removed.
Tool Description
Screw driver
3.0 Product Disassembly Process
3.1 List the basic steps that should typically be followed to remove components and materials requiring selective
treatment:
1.
Unscrew the screws on mounting angle 2, and then remove mounting angle 2 from the chassis.
2.
Remove film 3 from plastic panel 4.
3.
Remove film 5 from plastic panel 4.
4.
Remove plastic panel 4 from the chassis.
5.
Unscrew the screws on front panel 6, and then remove front panel 6 from the chassis.
6.
Unscrew the screws on front panel 7, and then remove front panel 7 from the chassis.
7.
Remove film 8 from the chassis.
8.
Unscrew the screws on front panel 9, and then remove front panel 9 from the chassis.
9.
Unscrew the screws on blank filler panel 10, and then remove blank filler panel 10 from the chassis.
10. Unscrew the screws on power module 11, and then remove power module 11 from the chassis.
11. Unscrew the screws on blank poe module panel 12, and then remove blank poe module panel 12 from the
chassis.
12. Unscrew the screws on blank power module panel 13, and then remove blank power module panel 13 from the
chassis.
13. Unscrew the screws on fan frame 14, and then remove fan frame 14 from the chassis.
14. Unscrew the screws on back cover 15, and then remove back cover 15.
15. Unscrew the screws on rib 17, and then remove rib 17 from the chassis.
16. Unscrew the screws on PCB 16, and then remove PCB 16.
17. Remove shielding finger 6-2 from front panel 6-1.
18. Unscrew the screws on pcb 6-3, and then remove pcb 6-3 from front panel 6-1.
19. Unscrew the screws on pcb 6-4, and then remove pcb 6-4 from front panel 6-1.
20. Unscrew the screws on pcb 6-5, and then remove pcb 6-5 from front panel 6-1.
21. Unscrew the screws on pcb 6-6, and then remove pcb 6-6 from front panel 6-1.
22. Remove film 6-7 from front panel 6-1.
23. Remove shielding finger 7-3 from front panel 7-1.
24. Unscrew the screws on pcb 7-2, and then remove pcb 7-2 from front panel 7-1.
25. Remove film 7-4 from front panel 7-1.
26. Unscrew the screws on pcb 7-5, and then remove pcb 7-5 from front panel 7-1.
27. Remove shielding finger 10-2 from blank filler panel 10-1.
28. Remove film 10-3 from front panel 10-1.
29. Unscrew the screws on PCB 14-2, and then remove PCB 14-2 from fan frame 14-1.
30. Remove film 14-3 from fan frame 14-1.
31. Remove shielding finger 14-4 from fan frame 14-1.
32. Unscrew the screws on fan 14-5, and then remove fan 14-5 from fan frame 14-1.
3.2 Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the items
contained in the product that require selective treatment (with descriptions and arrows identifying locations).
EL-MF877-00
Template Revision B
PSG instructions for this template are available at
EL-MF877-01
Tool Size (if
applicable)
2#
Page 2
Advertisement
