Camera Installation; Memory Card Installation - HIKVISION NK44W1H-1T Quick Start Manual

3 Camera Installation

Before you start:
● Make sure the device in the package is in good condition and all
the assembly parts are included.
● The standard power supply is 12 VDC. Make sure your power
supply matches with your camera.
● Make sure all the related equipment is power-off during the
installation.
● Check the specification of the products for the installation
environment.
● Make sure that the wall is strong enough to withstand four times
the weight of the camera and the bracket.
For the camera that supports IR, you are required to pay attention to
the following precaution to prevent IR reflection:
Make sure that there is no reflective surface too close to the
camera lens. The IR light from the camera may reflect back into
the lens causing reflection.

3.1 Memory Card Installation

Steps:
1. Loosen the screws to remove the bubble.
Wi-Fi Kit·Quick Start Guide
22