High or low beam can be selected
with the dimmer switch.
headlight is on high beam (
high beam indicator light goes on.
When the headlight is on high beam,
both headlights go on.
headlight is on low beam, only one
headlight goes on.
Turn Signal Switch
When the turn signal switch is
pushed to the left (
), the corresponding turn sig-
nals blink on and off.
) or right
To stop blinking, push the switch in.
When the horn button is pushed, the
When the LAP/passing button is
pushed, the headlight high beam
(passing beam) goes on to signal the
driver of the vehicle ahead that you are
about to pass. The passing light is shut
off as soon as the button is released.
Refer to the "Stop Watch" items in
Multifunction Meter section for the LAP
Refer to the S-KTRC or Power Mode
System instructions of the "How to Ride
the Motorcycle" chapter for operations.