Download  Print this page

Advertisement

38
GENERAL INFORMATION
To display each measured lap time
and lap number, push the lower but-
ton momentarily when the stop watch
is stopped.
When the lap number is displayed "–
–", the displayed time is the total time
of all timed laps.
To reset the stop watch and erase
all lap numbers and times, push the
lower button and hold it in until the
stop watch resets to zero.
NOTE
If the ignition switch is turned "OFF"
while the lap time/number is dis-
played, the total time of all timed
laps is displayed when the ignition
switch is turned "ON".
If the stop watch mode is shifted
to other modes during displaying
the lap time/number, the lap time or
total time of all timed laps are dis-
played when the stop watch mode is
reslected.
If the ignition switch is turned "OFF"
while counting the lap time, current
lap time is cleared. However, previ-
ous lap times are stored and previ-
ous lap time or total time of all timed
laps are displayed when the ignition
switch is turned "ON".
When the battery is disconnected,
the stop watch is resets to zero.
If the "FUEL" warning is displayed in
the multifunction display, the coolant
temperature or the intake air temper-
ature is displayed instead of lap num-
ber. However the time measurement
is not interrupted.

Advertisement

Table of Contents

   Also See for Kawasaki Ninja ZX-10R 2014

This manual is also suitable for:

Ninja zx-10r abs 2014

Comments to this Manuals

Symbols: 0
Latest comments: