MAINTENANCE AND ADJUSTMENT
Connect the (+) cable to the (+) ter-
minal, and then connect the (–) cable
to the (–) terminal.
Installing the (–) cable to the (+)
terminal of the battery or the (+)
cable to the (–) terminal of the
battery can seriously damaged
the electrical system.
Put a light coat of grease on the ter-
minals to prevent corrosion.
Cover the (+) terminal with the red
Reinstall the removed parts.
Do not turn the bolts because the re-
flector in the headlight comes off.
The left and right adjusters on the
headlight can move the direction of
the headlight beam to up, down, left
and right by turning each adjuster it-
self as the below table.