Download  Print this page

Advertisement

160
MAINTENANCE AND ADJUSTMENT
Tightening Torque
Axle Nut:
127 N·m (13.0 kgf·m, 93.7 ft·lb)
NOTE
If a torque wrench is not available,
this item should be serviced by an
authorized Kawasaki dealer.
Rotate the wheel, measure the chain
slack again at the tightest position,
and readjust if necessary.
Install a new cotter pin through the
axle nut and axle, and spread its
ends.
A. Cotter Pin
NOTE
When inserting the cotter pin, if the
slots in the nut do not align with
the cotter pin hole in the axle shaft,
tighten the nut clockwise up to the
next alignment.
It should be within 30 degrees.

Advertisement

Table of Contents

   Also See for Kawasaki Ninja ZX-10R 2014

This manual is also suitable for:

Ninja zx-10r abs 2014

Comments to this Manuals

Symbols: 0
Latest comments: