Download  Print this page

Advertisement

152
MAINTENANCE AND ADJUSTMENT
Turn out the accelerator cable ad-
juster until the throttle grip has the
proper play. Tighten the locknut.
A. Decelerator Cable
B. Accelerator Cable
C. Adjuster
D. Locknuts
If the throttle cables cannot be ad-
justed with the adjuster at the upper
of the throttle cable, further adjust-
ment of the throttle cables should be
done only by a competent mechanic
following the instructions in the Ser-
vice Manual.
With the engine idling, turn the han-
dlebar to each side.
movement changes the idle speed,
the throttle cables may be improperly
adjusted or incorrectly routed, or they
may be damaged. Be sure to correct
any of these conditions before idling.
WARNING
Operation with improperly ad-
justed, incorrectly routed, or
damaged cables could result in
an unsafe riding condition. Be
sure the control cables are ad-
justed and routed correctly, and
are free from damage.
If handlebar

Advertisement

Table of Contents

   Also See for Kawasaki Ninja ZX-10R 2014

This manual is also suitable for:

Ninja zx-10r abs 2014

Comments to this Manuals

Symbols: 0
Latest comments: