Page 1
Installation guide for GEMAPPS applications Configuring data connection SonyEricsson Serie T6xx & Serie Z6xx cell phones Date: January 2008...
Page 2
1. Configuring the data connection (GPRS / UMTS) In general the data connection of a new cell phone is properly configured when you buy it. If your data connection works, you can continue reading the chapter „Installing the mobile application“.
Page 3
1.1. Manual data configuration Step 1 Select „Connectivity“ from the main menu or „Options“ menü Step 2 Go to „Data Communication“ and then to „Data Accounts“ Step 3 Now select „New Account“ Activate „GPRS account“ Enter a name for a new account Enter a name for a new account Enter the APN-Address.
Page 4
Step 4 Go back to the menu „Connectivity“ and select „Internet Profiles“ Apply a „New Profile“ Now connect the profile with the data account, you just have installed.
Page 5
2. Installing the mobile application Getting Started with WAP message You will receive a WAP push message containing the URL to download the application. All settings must be pre- configured on your cellular device for receiving WAP messages. Open the message, select “Go To”. Your browser automatically opens a WAP page.The next steps of the installation are described there.
Page 6
Getting Started with SMS If your mobile phone does not support the WAP push or you haven't installed the application within a few minutes, you will additionally receive the download link via SMS. Open the message, select „go to“ from the „Message menu“ and click „Select“...
Page 7
Other details to SonyEricsson devices These instructions T610, T616, T618, Z600, Z608, T628, T630, T637 apply apply to the following Sony Ericsson-Devices Additional spercifications Details of mobile telephone system providers for data configuration T-Mobile GPRS APN internet.t-d1.de DNS1 193.254.160.1...
Page 8
Disclaimer: All information is based upon extensive testing of the above mentioned cell phone models. GEMAPPS reserves the right not to be responsible for the topicality, correctness, completeness or quality of the information provided. Liability claims regarding damage caused by the use of any information provided, including any kind of information which is incomplete or incorrect, will therefore be rejected.