Agilent Technologies Bravo Platform User Manual page 166

Related information
Bravo Platform User Guide
Step Procedure
5 Make sure the unit is on, and set the
temperature on the front display. Press ENTER
and then press START/STOP to start the
cooling.
Verify that the cooling pad gets cold.
For information about...
Verifying and setting the teachpoint for
the accessory
Using the accessory in a protocol
A Accessories and platepads
Setting up the Thermal Station (cooling pad)
See...
Liquid chilling unit
manufacturer's user
documentation
See...
•
"Using the teach plate to set the
teachpoint for an accessory" on
page 113
•
"Setting teachpoints" on page 34
VWorks Automation Control User Guide
155