Advertisement
How to use your Blender (FX350B)
• Your Black & Decker blender has been designed for the following applications: blending, mixing and
crushing of solid and liquid food and beverage ingredients. This product is intended for household use only.
• Prepare the ingredients and place them in the jar (3). Do not over-fill.
• Fit the lid (2) over the bowl and the lid cap (1) to it, rotating both in an anti-clockwise direction to lock them
in place.
• Place the Blender jar (3) on the motor housing and rotate it in an anti-clockwise direction until it locks in
place.
•
Do not open lid until the blades come to a complete stop.
Note: The blender will not work unless it is correctly fitted.
Press the on / off switch (8) down.
• The unit should only be operated for 5 to 15 second pulses only. Never operate the chopper continuously
for longer than 45 seconds at a time. Always allow the appliance to cool down for a minimum of 15 minutes
before next use.
• When the correct consistency is achieved, disconnect the unit from the electrical supply.
• Remove the jar from the motor housing. Remove the lid & pour the ingredients into a suitable container.
• How to take care of your Chopper (FX350) / Chopper Blender (FX350B)
• The appliance must be cleaned thoroughly after each use.
• Make sure the appliance is switched 'OFF' and unplug the unit from the power supply before cleaning.
NOTE: NEVER IMMERSE the motor housing (9) IN WATER OR ANY OTHER LIQUID.
• To clean motor housing, wipe clean with a damp cloth. Allow to dry thoroughly before re-using or storing.
• To clean the Blender jar, add 0.5L of warm water and a little detergent to the jar.
• Fit the jar to the Motor housing & connect it to a suitable electrical supply.
• Run the Blender for a few seconds until clean. Rinse, repeat & rinse again.
• Dry carefully, taking care when approaching the blades as these are very sharp.
• All other parts can be washed using a mid detergent and warm water. These parts are not dishwasher safe
and must be hand washed.
• After washing, rinse and allow all parts to dry thoroughly before re-assembly and storing.
• Take care when handling the cutting blades as they are sharp.
Protecting the environment
Separate collection. This product must not be disposed of with normal household waste.
Should you find one day that your Black & Decker product needs replacement, or if it is of no further use to
you, do not dispose it off with other household waste. Make this product available for separate collection.
Separate collection of used products and packaging allows materials to be recycled and used again.
Use of recycled materials helps prevent environmental pollution and reduces the demand for raw
materials.
Local regulations may provide for separate collection of electrical products from the household, at municipal
waste sites or by the retailer when you purchase a new product.
Black & Decker provides a facility for the collection and recycling of Black & Decker products once they have
reached the end of their working life. To take advantage of this service please return your product to any
authorised repair agent who will collect them on our behalf. You can check the location of your nearest
authorised repair agent by contacting your local Black & Decker office at the address indicated in this manual.
A list of authorised Black & Decker repair agents and full details of our after-sales service and contact are
available on the Internet at: www.2helpU.com
-5-
ENGLISH
Advertisement
