Dyna-Glo DGPH301BL Owner's Manual page 6

ASSEMBLY INSTRUCTIONS
1. Assemble the wheel assembly (L) to the
bottom plate(M). Fix the wheel assembly (L)
to the bottom plate using 4pcs bolt M6X12 (EE)
and 4pcs flange nut M6
Hardware Used
EE
Bolt M6 X 12
FF
M6 Flange nut
II
Wrench
2. Unscrew ignitor knob (marked with lighting bolt)
out of the control panel. Insert AA battery (NN)
with positive end (+) outward and replace ignitor
knob.
Hardware Used
NN
battery
AA
The electronic ignition requires 1 "AA" alkaline battery, which is included.
DO NOT mix old and new batteries.
DO NOT mix alkaline, standard (Carbon-Zinc), or rechargable (Nickel-Cadmium) batteries.
DO NOT dispose of batteries in fire. Improper disposal may cause batteries to leak or explode.
(FF).
x 4
x 4
x 1
x 1
WARNING
1
M
EE
L
FF
2
NN
6