Liko Solo SupportVest Instruction Manual

Solo SupportVest™
Instruction Guide
The Solo SupportVest is used in combination with the
Sabina™ sit-to-stand lift to assist lifting of patients from a
seated to a standing position. The Solo SupportVest lifts
behind the back and under the arms. It is suitable for
patients who have to be helped to a standing position but
are able to stand steadily on their own once they are up.
The Solo SupportVest is intended for use in combination with
the Sabina sit-to-stand lift and a 350 Slingbar (slim).
In this document, the person being lifted is referred to as the patient and the person helping them is referred to as the
caregiver.
Caution triangles are used to warn of situations that demand extra care and attention.
Important!
Lifting and transferring a patient always involves a degree of risk. Always study the instruction guides for both the lift
and the accessories before use. A complete understanding of the contents of instruction guides is essential. Only trained
personnel should use the equipment. Always make sure the lifting accessory is appropriate for the lift being used. Exercise
caution and care during use of the products. As a caregiver, you are always responsible for the patient's safety. You must
be aware of the patient's capabilities for managing the lifting situation. Whenever in doubt, contact the manufacturer/
supplier. Instruction guides can be downloaded, free of charge, at www.liko.com.
7EN160180 Rev 4
ENGLISH
Product Description
Together, the Solo SupportVest and Sabina sit-to-stand lift
form a functional unit. For complete information and best
results, read the instruction guides for both products.
The Solo SupportVest is intended for short-term use by a
single patient. It cannot be washed. Instead, it should be
disposed of when soiled or when no longer needed by the
patient. Liko's product range includes several models of
washable vests for long-term use that can be used together
with the Sabina sit-to-stand lift.